LP2995 Datasheet, PDF (1/13 Pages) National Semiconductor (TI) – DDR Termination Regulator

July 2003
LP2995
DDR Termination Regulator
General Description
The LP2995 linear regulator is designed to meet the JEDEC
SSTL-2 and SSTL-3 specifications for termination of DDR-
SDRAM. The device contains a high-speed operational am-
plifier to provide excellent response to load transients. The
output stage prevents shoot through while delivering 1.5A
continuous current and transient peaks up to 3A in the
application as required for DDR-SDRAM termination. The
LP2995 also incorporates a V_SENSE pin to provide superior
load regulation and a V_REF output as a reference for the
chipset and DDR DIMMS.
Patents Pending
Features
n Low output voltage offset
n Works with +5v, +3.3v and 2.5v rails
n Source and sink current
n Low external component count
n No external resistors required
n Linear topology
n Available in SO-8, PSOP-8 or LLP-16 packages
n Low cost and easy to use
Applications
n DDR Termination Voltage
n SSTL-2
n SSTL-3
Typical Application Circuit
20039302
© 2003 National Semiconductor Corporation DS200393
www.national.com