|
LMH6628EP Datasheet, PDF (1/16 Pages) National Semiconductor (TI) – Enhanced Plastic Dual Wideband, Low Noise, Voltage Feedback Op Amp | |||
|
LMH6628EP
OBSOLETE
October 15, 2010
Enhanced Plastic Dual Wideband, Low Noise, Voltage
Feedback Op Amp
General Description
The National LMH6628EP is a high speed dual op amp that
offers a traditional voltage feedback topology featuring unity
gain stability and slew enhanced circuitry. The LMH6628EP's
low noise and very low harmonic distortion combine to form
a wide dynamic range op amp that operates from a single (5V
to 12V) or dual (±5V) power supply.
Each of the LMH6628EP's closely matched channels pro-
vides a 300MHz unity gain bandwidth and low input voltage
noise density (2nV/ ). Low 2nd/3rd harmonic distortion
(â65/â74dBc at 10MHz) make the LMH6628EP a perfect
wide dynamic range amplifier for matched I/Q channels.
With its fast and accurate settling (12ns to 0.1%), the
LMH6628EP is also an excellent choice for wide dynamic
range, anti-aliasing filters to buffer the inputs of hi resolution
analog-to-digital converters. Combining the LMH6628EP's
two tightly matched amplifiers in a single 8-pin SOIC package
reduces cost and board space for many composite amplifier
applications such as active filters, differential line drivers/re-
ceivers, fast peak detectors and instrumentation amplifiers.
The LMH6628EP is fabricated using Nationalâs VIP10⢠com-
plimentary bipolar process.
To reduce design times and assist in board layout, the
LMH6628EP is supported by an evaluation board
(CLC730036).
ENHANCED PLASTIC
⢠Extended Temperature Performance of â40°C to +85°C
⢠Baseline Control - Single Fab & Assembly Site
⢠Process Change Notification (PCN)
⢠Qualification & Reliability Data
⢠Solder (PbSn) Lead Finish is standard
⢠Enhanced Diminishing Manufacturing Sources (DMS)
Support
Features
â Wide unity gain bandwidth: 300MHz
â Low noise: 2nV/
â Low Distortion: â65/â74dBc (10MHz)
â Settling time: 12ns to 0.1%
â Wide supply voltage range: ±2.5V to ±6V
â High output current: ±85mA
â Improved replacement for CLC428
Applications
â High speed dual op amp
â Low noise integrators
â Selected Military Applications
â Selected Avionics Applications
Ordering Information
Part Number
LMH6628MAEP
(Note 1, Note 2)
VID Part Number
V62/04624-01
TBD
NS Package Number (Note 3)
M08A
TBD
Note 1: For the following (Enhanced Plastic) version, check for availability: LMH6628MAXEP. Parts listed with an "X" are provided in Tape & Reel
and parts without an "X" are in Rails.
Note 2: FOR ADDITIONAL ORDERING AND PRODUCT INFORMATION, PLEASE VISIT THE ENHANCED PLASTIC WEB SITE AT: www.national.com/
mil
Note 3: Refer to package details under Physical Dimensions
VIP10⢠is a trademark of National Semiconductor Corporation.
© 2010 National Semiconductor Corporation 200886
200886 Version 4 Revision 2 Print Date/Time: 2010/10/15 15:22:20
www.national.com
|
▷ |