SM3320AGA Datasheet, PDF (3/15 Pages) Nippon Precision Circuits Inc – Dark current compensation circuit built-in for stable signal output

SM3320AGA
SPECIFICATIONS
Absolute Maximum Ratings
V_SS=0V
Parameter
Symbol
Conditions
Rating
Unit
Supply voltage^*1
Input voltage^*1*2
Output voltage^*1*2
V_DD
V_IN
V_OUT
VDD pin
DATA, CLK, SE, OE, A0, A1, A2 pins
OUT, REF pins
-0.3 to +7.0
V
-0.3 to V_DD+0.3
V
-0.3 to V_DD+0.3
V
Storage temperature^*3
T_STG
-55 to +90
°C
*1. These ratings must not be exceeded, not even momentarily. If a rating is exceeded, there is a risk of IC failure, deterioration in characteristics, and decrease
in reliability.
*2. V_DD is a V_DD value of recommended operating conditions.
*3. When stored in nitrogen or vacuum atmosphere applied to IC itself only (excluding packaging materials).
Recommended Operating Conditions
The recommended operating conditions are the conditions for which the electrical characteristics are guaranteed.
VSS=0V
Parameter
Symbol
Conditions
MIN TYP MAX
Unit
Supply voltage
V_DD
OUT output load^*1
REF output load^*1
2.7
5.0
5.5
V
-
-
100
pF
-
-
100
pF
Operating temperature
T_a
-40
-
85
°C
*1. The output load of the OUT and REF outputs presumes capacitive load only. For current load, an error in the output voltage occurs, so the outputs must
be used under high-impedance conditions.
Note. Since it may influence the reliability if it is used out of range of recommended operating conditions, this product should be used within this range.
SEIKO NPC CORPORATION - 3