CSTCE12M0G55Z-R0 Datasheet, PDF (41/45 Pages) Murata Manufacturing Co., Ltd. – Ceramic Resonators (CERALOCKr)

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Nov.22,2012
Continued from the preceding page.
c Dimensions of Taping
CSTCE_V13L/CSTCE_VH3L
4.0±0.1
Dimensions of Carrier Tape
2.0±0.05
+0.1
ø1.5 -0.0
Packaging for General Usage -MHz Chip Type-
CSTCW_X11
4.0±0.1
2.0±0.1
ø1.5+-00..01
4.0±0.1
+0.1
ø1.0 -0.0
The cover film peel strength force 0.1 to 0.7N
+0.10
1.50 -0.05
The cover film peel speed 300mm/min.
10° ^{Cover Film}
(3°)
Direction of Feed
CSTCC_G
4.0±0.1
2.0±0.05
ø1.55±0.05
(in mm)
The cover film peel strength force 0.1 to 0.7N
The cover film peel speed 300mm/min.
Cover Film
10°
4.0±0.1
2.3±0.1
(3°)
ø1.0+-00..02
Direction of Feed
∗1, ∗2: Dimensions vary with product thickness of CERALOCKr.
Thickness of CERALOCKr
t1
∗1
t2
∗2
1.40–1.20
1.48±0.1
2.1 max.
1.15–1.00
1.30±0.1
1.9 max.
0.95–0.90
1.12±0.1
1.7 max.
(in mm)
CSTCR_G
4.0±0.1
2.0±0.05
ø1.5+-00.1
4.0±0.1
ø1.5
+0.3
-0.0
The cover film peel strength force 0.1 to 0.7N 3.3±0.1
The cover film peel speed 300mm/min.
Cover Film
(3°)
10°
Direction of Feed
∗1, ∗2: Dimensions vary with frequency range of CERALOCKr.
Frequency Range
t1
∗1
t2
∗2
2.00–2.99MHz
1.85±0.05
2.45 max.
3.00–3.99MHz
1.65±0.05
2.25 max.
(in mm)
CSTCE_G
4.0±0.1
2.0±0.05
ø1.5
+0.1
-0.0
4.0±0.1
+0.1
ø1.5 -0
2.2±0.1
The cover film peel strength force 0.1 to 0.7N
(3°)
The cover film peel speed 300mm/min.
Cover Film
10°
Direction of Feed
CSTCE_V
4.0±0.1
Dimensions of Carrier Tape
2.0±0.05
+0.1
ø1.5 -0.0
(in mm)
4.0±0.1
ø1.0
+0.2
-0.0
The cover film peel strength force 0.1 to 0.7N
1.50
+0.10
-0.05
The cover film peel speed 300mm/min.
(3˚)
Cover Film
10°
Direction of Feed
CSTCG_V
4.0±0.1
2.0±0.05
+0.1
ø1.5 -0.0
(in mm)
4.0±0.1
+0.1
ø1.0 -0.0
The cover film peel strength force 0.1 to 0.7N
+0.10
1.50 -0.05
The cover film peel speed 300mm/min.
Cover Film
(3°)
10°
Direction of Feed
CSACW_X
4.0±0.1
2.0±0.1
ø1.5 ^+- _00..01
(in mm)
4.0±0.1
+0.1
ø1.0 -0.0
The cover film peel strength force 0.1 to 0.7N
1.50±0.1
The cover film peel speed 300mm/min.
10° ^{Cover Film}
(3°)
Direction of Feed
(in mm)
The cover film peel strength force 0.1 to 0.7N
The cover film peel speed 300mm/min.
Cover Film
10°
4.0±0.1
2.3±0.1
(3°)
ø1.0-+00..02
Direction of Feed
∗1, ∗2: Dimensions vary with product thickness of CERALOCKr.
Thickness of CERALOCKr
t1
∗1
t2
∗2
1.40–1.20
1.48±0.1
2.1 max.
1.15–1.00
1.30±0.1
1.9 max.
0.95–0.90
1.12±0.1
1.7 max.
(in mm)
Continued on the following page.
39