CSTCE12M0G55Z-R0 Datasheet, PDF (35/45 Pages) Murata Manufacturing Co., Ltd. – Ceramic Resonators (CERALOCKr)

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P16E.pdf
Nov.22,2012
Notice for General Usage -MHz Chip Type-
Continued from the preceding page.
2. Wash
Some series do not withstand washing.
Please check the list at right before use.
(1) Cleaning Solvents
HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care FRW
Series
CSTCC (2.00 to 3.49MHz)
CSTCC (3.50 to 3.99MHz)
Wash
Not Available
Available
(2) Temperature Difference : dT *1
dTV60°C (dT=Component-solvent)
*1 ex. If the component is immersed at +90°C into
cleaning solvent at +60°C, then dT=30°C.
(3) Conditions
(a) Ultrasonic Wash
1 minute max. in above solvent at +60°C max.
(Frequency: 28kHz, Output: 20W/l)
(b) Immersion Wash
5 minutes max. in above solvent at +60°C max.
(c) Shower or Rinse Wash
5 minutes max. in above solvent at +60°C max.
(4) Drying
5 minutes max. by air blowing at +80°C max.
(5) Other
(a) Total washing time should be within 10 minutes.
(b) The component may be damaged if it is washed with
chlorine, petroleum, or alkali cleaning solvent.
3. Coating
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to confirm
stable electrical characteristics are maintained.
33