|
LSM2-T-30-D12-C Datasheet, PDF (1/12 Pages) Murata Manufacturing Co., Ltd. – DOSA-SMT, 30A POL DC/DC Converters | |||
|
www.murata-ps.com
LSM2-T/30-D12 Series
DOSA-SMT, 30A POL DC/DC Converters
Typical unit
FEATURES
ï®ï Non-isolated Point-of-Load (POL) converter, ideal
for mixed voltage systems
ï®ï Optimized for CPUs, DSPs and programmable logic
- FPGAs, ASICs
ï®ï 30 Amps maximum output current
ï®ï User-selectable output voltage, 0.8Vdc to 5.0Vdc
via trim resistor or voltage input
ï®ï Wide input range 6Vdc to 14Vdc (Vout <3.6V)
ï®ï Selectable phased start-up sequencing and tracking
ï®ï Excellent efï¬ciency over output voltage range
ï®ï Two models available, with or without additional
ground/thermal pads
ï®ï Fast settling, high di/dt slew rate, low output noise
ï®ï Extensive self protection plus 'hiccup' short circuit
auto recovery
ï®ï Meets full safety and emission certiï¬cation
DESCRIPTION
Todayâs high performance CPU and programma-
ble logic devices demand superior performance
from their power source. The LSM2-T/30-D12
series DC/DC converters offer up to 30 Amps
continuous output power with a user-selectable
output of 0.8 to 3.6 Volts. 25 Amps output is
available up to 5.0 VOUT. This tiny converter is
ideal for applications with an input range of
6 to 14 Volts DC. The pinout, trim system and
mechanical footprint is compatible with the DOSA
(www.dosapower.com) industry standard.
To ensure very high performance of powered
logic systems, the LSM2-T/30-D12 features low
output noise, high slew rates (20 Amps/μSec.),
fast transient response (25 μSec settling) and
tight line and load regulation. Many logic devices
require controlled start up and tracking capabili-
ties. The LSM2-T/30-D12 includes a Sequence/
Track function and prebias protection against
external startup voltages. Other features include
no additional external components required,
stable no-load operation, up to 10,000 μF output
load capacitance and no reverse conduction.
System functions offer a remote On/Off
control, two additional ground pins (optional)
and a load Sense input. These converters meet
agency standards UL/EN 60950-1, CAN/CSA-
C22.2 60950-1, IEC 60950-1, 2nd edition, and
EN55022/CISPR22 emissions characterization.
The automated surface mount assembly is fully
compatible with RoHS (Reduction of Hazard-
ous Substances) construction and attachment.
The LSM2-T/30-D12 mounts to its host carrier
board via reï¬ow-soldered PCB pads.
The extraordinary efï¬ciency means low heat
and freedom from expensive, bulky heat sinks. A
wealth of protection features include input under-
voltage shutdown, output overcurrent current lim-
iting, short circuit protection and overtemperature
shutdown/recycle.
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_LSM2_T30_D12 Series.C01Î Page 1 of 12
|
▷ |