D1U-W-1600-12-HC2C Datasheet, PDF (6/7 Pages) Murata Power Solutions Inc. – AC/DC Front End Power Supply + S1U Power Shelf

MECHANICAL DIMENSIONS - D1U-W-1600-12-Hx
20,20 ±0,40
[ 0.795 ±0.015 ]
127,85 ±0,40
[ 5.033 ±0.015 ]
D1U-W-1600-12-Hx Series
AC/DC Front End Power Supply + S1U Power Shelf
312,89 ±0,35
[ 12.318 ±0.013 ]
8,89
[ 0.350 ]
REF
132,85 ±0,50
[ 5.230 ±0.019 ]
120,65 ±0,65
[ 4.750 ±0.025 ]
37,30 ±0,40
[ 1.468 ±0.015 ]
304,80 ±0,65
[ 12.000 ±0.025 ]
12,63 ±0,40
[ 0.497 ±0.015 ]
41,00 ±0,40
[ 1.614 ±0.015 ]
AC Input Connector: The AC input connector is standard IEC320 C20 (20A).
MECHANICAL DIMENSIONS - S1U Power Shelf
Dimensions: 12.00”L x 4.75” W x 1.6” H (40.7H x 120.6W x 304.90mm)
17.315
(439.80)
18.307
(465.00)
18.992
(482.40)
www.murata-ps.com
NOTES:
1. The DC output terminals are of terminal block style that will allow connection using crimp
type right-angle lugs accepting up to AWG#2 wire, Panduit lug LCC2-14AWF-Q or equivalent is
recommended.
2. Two M6 studs at 15.88 mm centre spacing are provided for connection to each pole. Hardware is
provided for fastening the lugs/wires as well as terminal block covers
Technical enquiries email: [e-mail], tel: [phone]
CPS_D1U-W-1600-12-Hx.C06 Page 6 of 7