D1U-W-1600-12-HC2C Datasheet, PDF (4/7 Pages) Murata Power Solutions Inc. – AC/DC Front End Power Supply + S1U Power Shelf

D1U-W-1600-12-Hx Series
AC/DC Front End Power Supply + S1U Power Shelf
OUTPUT CONNECTOR AND SIGNAL SPECIFICATION
DC and Signal Connector: Tyco Part # 1-6450132-2, or FCI PowerBlade # 51732-021
P1
P2
P3
P4
P5
P6
P7
P8
x1
x2
x3
x4
x5
x6
AC_OK
P_GOOD
V_SB
RETURN
V_SB
RETURN
V_SB
+OUT
V_SB
+OUT
D
SPARE
SPARE
V_SB
V_SB
RETURN RETURN
V_SB
+OUT
V_SB
+OUT
C
VOUT
VOUT
VRTN
VRTN
VRTN
VRTN
VOUT
VOUT
I_SHARE
I²C ADR0
I²C ADR1
I²C ADR2
PS_KILL
PS_
PRESENT
B
SENSE + SENSE - I²C DATA
I²C
CLOCK
SPARE PS_ON A
mate-last pins
Pin Assignment
P1, P2, P7, P8
P3, P4, P5, P6
A1
A2
C5, C6, D5, D6
C3, C4, D3, D4
B1
D1
D2
B5
B6
A6
A3
A4
B2
B3
B4
Signal Name
VOUT
VRTN
Sense +
Sense -
V_SB
V_SB Return
I_Share
AC_OK
P_Good
PS_Kill
PS_Present
PS_On
I²C Data
I²C Clock
I²C Adr0
I²C Adr1
I²C Adr2
Description
Main output voltage
Main output voltage, return
VOUT remote sense, positive node input, connected to the
+ve load point
VOUT remote sense, negative node input, connected to the
-ve load point
Standby voltage output
Standby voltage, return, tied internally to Output Return
Active load sharing bus
Input AC Voltage “OK” signal output (Internal pull up is
10kΩ to Vsb)
Power good signal output (Internal pull up is 10kΩ to Vsb)
Floating pin will turn off P/S (shorter pin, last-make and
first-break contact for hot plugging). This signal overrides
PS-On in disabling the Main Output
Internally tied to Vsb return
Internal 1K ohm pull-up to Vsb, (accepts open collector/
drain drive), This signal to be pulled low to turn-on power
supply
I²C serial data bus
I²C serial clock bus
Address input 0, internal pull-up to Vsb
Address input 1, internal pull-up to Vsb
Address input 2, internal pull-up to Vsb
High Level
Low Level
0 – 8V
>2.4V (active, OK)
<0.4V
>2.4V (active, Good)
<0.4V
>2.1V (open, or Vsb)
<0.7V (active, PS:On)
0V
>2.1V (open, or Vsb)
<0.7V (active, PS:On)
Vsb
Vsb
>2.1V, < Vsb
<0.8V
>2.1V, <Vsb
<0.8V
>2.1V, <Vsb
<0.8V
I Max
-4 mA / +5 mA
+4 mA
-2 mA
+4 mA
-2 mA
N/A
-4 mA
-1 mA
±1 mA
±1 mA
±1 mA
D1U MATING CONNECTORS
12V D1U mat-
ing connector
Straight
MPS
N/A
FCI
51742-10802400CALF
Tyco
TBD
Press Fit
Right Angle
N/A
51762-10802400CBLF
TBD
2 _{Solder connector recommended for board thickness of <0.090}
Straight
N/A
51742-10802400AALF
TBD
Solder ²
Right Angle
36-0430032-0
51762-10802400ABLF
TBD
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
CPS_D1U-W-1600-12-Hx.C06 Page 4 of 7