BDW42 Datasheet, PDF (2/6 Pages) Motorola, Inc – Darlington Complementary Silicon Power Transistors

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Characteristic}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{OFF CHARACTERISTICS}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Collector Emitter Sustaining Voltage (1)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ (IC = 30 mAdc, IB = 0)
BDW46
BDW42/BDW47
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Collector Cutoff Current}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{(VCE = 40 Vdc, IB = 0)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ (VCE = 50 Vdc, IB = 0)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Collector Cutoff Current
(VCB = 80 Vdc, IE = 0)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{(VCB = 100 Vdc, IE = 0)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Emitter Cutoff Current}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ^{(VBE = 5.0 Vdc, IC = 0)}
BDW46
BDW42/BDW47
BDW41/BDW46
BDW42/BDW47
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ON CHARACTERISTICS (1)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ^{DC Current Gain}
(IC = 5.0 Adc, VCE = 4.0 Vdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{(IC = 10 Adc, VCE = 4.0 Vdc)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Collector–Emitter Saturation Voltage}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ^{(IC = 5.0 Adc, IB = 10 mAdc)}
(IC = 10 Adc, IB = 50 mAdc)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Base–Emitter On Voltage}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{(IC = 10 Adc, VCE = 4.0 Vdc)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{SECOND BREAKDOWN (2)}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Second Breakdown Collector
Current with Base Forward Biased
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _BDW42
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _BDW46/BDW47
VCE = 28.4 Vdc
VCE = 40 Vdc
VCE = 22.5 Vdc
VCE = 36 Vdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{DYNAMIC CHARACTERISTICS}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Magnitude of common emitter small signal short circuit current transfer ratio}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ (IC = 3.0 Adc, VCE = 3.0 Vdc, f = 1.0 MHz)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Output Capacitance
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ^{(VCB = 10 Vdc, IE = 0, f = 0.1 MHz)}
BDW42
BDW46/BDW47
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ _{Small–Signal Current Gain}
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ (IC = 3.0 Adc, VCE = 3.0 Vdc, f = 1.0 kHz)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ^{(1) Pulse Test: Pulse Width = 300 µs, Duty Cycle = 2.0%.}
BDW42 BDW46 BDW47
Symbol
Min
VCEO(sus)
80
100
ICEO
—
—
ICBO
—
—
IEBO
—
Max
Unit
Vdc
—
—
mAdc
2.0
2.0
mAdc
1.0
1.0
2.0
mAdc
hFE
1000
—
250
—
VCE(sat)
—
—
Vdc
2.0
3.0
VBE(on)
—
3.0
Vdc
IS/b
Adc
3.0
—
1.2
—
3.8
—
1.2
—
fT
4.0
—
MHz
Cob
pF
—
200
—
300
hfe
300
—
(2) Pulse Test non repetitive: Pulse Width = 250 ms.
5.0
RB AND RC VARIED TO OBTAIN DESIRED CURRENT LEVELS
VCC
– 30 V
3.0
ts
D1 MUST BE FAST RECOVERY TYPES, e.g.:
[ 1N5825 USED ABOVE IB 100 mA
[ MSD6100 USED BELOW IB 100 mA
2.0
RC
SCOPE
1.0
tf
TUT
0.7
V2
RB
0.5
APPROX
+ 8.0 V
51 D1
[ [ 8.0 k
150
0.3
tr
0
0.2 _{VCC = 30 V}
V1
APPROX
– 12 V
25 µs
v tr, tf 10 ns
DUTY CYCLE = 1.0%
+ 4.0 V
for td and tr, D1 id disconnected
and V2 = 0
For NPN test circuit reverse all polarities
IC/IB = 250
0.1 IB1 = IB2
0.07 _{TJ = 25°C}
0.05
0.1
0.2 0.3
td @ VBE(off) = 0 V
0.5 0.7 1.0
2.0 3.0
IC, COLLECTOR CURRENT (AMP)
5.0 7.0 10
Figure 2. Switching Times Test Circuit
Figure 3. Switching Times
Motorola Bipolar Power Transistor Device Data
3–213