0438790058 Datasheet, PDF (4/6 Pages) Molex Electronics Ltd. – MINI-FIT JR. CONNECTOR SYSTEM COMPLIANT PIN INTERFACE (CPI) (WIRE TO PCB & PCB TO PCB)

PRODUCT SPECIFICATION
5.2 MECHANICAL PERFORMANCE
Section
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
5.2.9
5.2.10
5.2.11
Item
Contact Insertion and
Withdrawal
Connector Insertion
and Withdrawal
Crimp Terminal
Insertion Force
Crimp Terminal
Retention Force
Header Terminal
Retention Force
Wire Pull Out Force
Normal Force
Compliant Pin Insertion
and Retention Force
Panel Insertion &
Withdrawal
Durability
Vibration
Test Condition
Insert and withdraw a contact at a
speed rate of 25± 6 mm / Minute
Insert and withdraw a connector at
a rate of 25± 6 mm / Minute
Insert the crimped terminal into the
housing
Apply axial pull out force at a
speed rate of 25± 6 mm/minute on
the terminal assembled in the
housing and with the TPA cover
installed.
Apply axial pull out force at a
speed rate of 25± 6mm / minute on
the terminal assembled in the
housing.
Mount the crimped terminal, apply
an axial pull out force on the wire
at a speed rate of 25± 6mm /
minute.
Apply a perpendicular force at a
speed rate of 25± 6 mm / minute.
Insert Compliant Pin terminal at a
speed rate of 25± 6 mm / minute
into printed circuit board.
Insert and withdraw a connector at
a speed rate of 25± 6 mm / minute
Insert and withdraw connectors (30
times) at a maximum rate of 10
cycles per minute prior to
environmental tests.
Amplitude: 1.50 mm peak to peak
Sweep: 10-50-10 Hz in one minute
Requirement
Max. Insertion = 1.5Kg.
Min. Withdrawal = .01Kg.
Max. Insertion =
1.5Kg/ckt.
Min. Withdrawal =
0.1Kg/ckt.
Max. Insertion = 1.5Kg
Min. Retention = 3.0Kg
Min. Retention = 1.0Kg
16 Awg = 9.0 Kg Min.
18 Awg = 9.0 Kg Min.
20 Awg – 6.0 Kg Min.
22 Awg = 4.0 Kg Min.
24 Awg = 3.0 Kg Min.
26 Awg = 2.0 Kg Min.
28 Awg = 1.0 Kg Min.
150 g min.
Insertion = 20 Kg max.
Withdrawal = 2 Kg min.
Insertion = 23 Kg max.
Withdrawal = 12 Kg min.
Contact Res. Change
= 20 mΩ max.
Contact Res. Change =
20 MΩ max.
REVISION: ECR/ECN INFORMATION:
5
EC No:UCP2013-0251
DATE: ^201207/19
DOCUMENT NUMBER:
PS-43879-001
TITLE:
PRODUCT SPECIFICATION
SHEET No.
MINI-FIT JR. CONNECTOR SYSTEM
COMPLIANT PIN INTERFACE (CPI)
4 of 6
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
NNGUYEN
BELL
SMITH-ROEMER
FILENAME: PS43879.DOC