0438790058 Datasheet, PDF (2/6 Pages) Molex Electronics Ltd. – MINI-FIT JR. CONNECTOR SYSTEM COMPLIANT PIN INTERFACE (CPI) (WIRE TO PCB & PCB TO PCB)

PRODUCT SPECIFICATION
4.0 RATINGS
4.1 VOLTAGE RATINGS
UL / CSA 600 VOLTS AC (RMS) / DC
4.2 CURRENT RATINGS
(tested to 30deg.C max. rise above ambient)
Brass or Phosphor Bronze terminals with Tin or Gold Plating
Ckt. Size /
2
4-6
7 - 10
Wire Awg.
16 Awg 8 Amperes 7 Amperes 6 Amperes
18 Awg 8 Amperes 7 Amperes 6 Amperes
Maximum 20 Awg 6 Amperes 5 Amperes 4 Amperes
Rated
22 Awg 4 Amperes 3 Amperes 3 Amperes
Current 24 Awg 3 Amperes 2 Amperes 2 Amperes
26 Awg 2 Amperes 1 Amperes 1 Amperes
28 Awg 1 Amperes 1 Amperes 1 Amperes
Header to Ckt. Size
2
4-6
7 - 10
Header Current 8 Amperes 7 Amperes 6 Amperes
12 - 24
5 Amperes
5 Amperes
4 Amperes
3 Amperes
2 Amperes
1 Amperes
1 Amperes
12 - 24
6 Amperes
4.3 TEMPERATURES
Operating:*
-40 Degrees C to +105 Degrees C
Nonoperating:
-40 Degrees C to +105 Degrees C
*(Including 30 degrees C terminal temperature at full current)
Note: The Mini-Fit CPI™ connector system was not designed or tested for either
current sharing or hot plugging (mating and unmating of live circuits). Use of this
connector system in these types of applications is not recommended and is not within
the scope of this product specification.
REVISION: ECR/ECN INFORMATION:
5
EC No:UCP2013-0251
DATE: ^201207/19
DOCUMENT NUMBER:
PS-43879-001
TITLE:
PRODUCT SPECIFICATION
SHEET No.
MINI-FIT JR. CONNECTOR SYSTEM
COMPLIANT PIN INTERFACE (CPI)
2 of 6
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
NNGUYEN
BELL
SMITH-ROEMER
FILENAME: PS43879.DOC