455600160 Datasheet, PDF (5/27 Pages) Molex Electronics Ltd. – 0.8MM HANDYLINK 16 CKT CRADLE CONN. ASSY PERPENDICULAR TO PCB

HANDYLINK™
APPLICATION SPECIFICATION
1.0 SCOPE
This specification addresses the manufacturing techniques and end-usage considerations for Molex’s 0.8mm pitch HandyLink™ I/O
Connectors. The common contact interface used in this family of connectors consists of a flat pad mated to a radiussed edge on a
compression spring blade. The flat pad is enclosed by plastic in an over-molded receptacle housing which provides a sealed
ineterface to facilitate ingress protection. The compression spring blades are extremely durable and are capable of sustaining over
20,000 mating cycles. Two “passive” latches counteract the compression springs to keep the connector pairs mated but enable
simple disconnection by the end-user.
The customer is encouraged to contact Molex with any questions regarding the application of this product.
2.0 PRODUCT DESCRIPTION
2.1 Product Names and Part Numbers
SMT Receptacle Connectors
Series: 44828
SMT Cradle Connectors
Series 45560 (Perpendicular and Parallel Mating)
Plug Connector Modules
Series 45339 (Wire Termination)
Series 45593 (PCB Termination)
2.2 Dimensions, Materials, Platings, and Markings
(See applicable sales drawings for information)
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
Product Specification: PS-44828-001; Sales Drawing s: SD-44828-162, SD-45560-160, SD-45560-161, SD-45339-160, SD-45593-160
5 _REVISION:
B
ECR/ECN INFORMATION:
EC No: UCP2009-1982
DATE: 2009/02/09
TITLE:
APPLICATION SPECIFICATION
HANDYLINK™I/O CONNECTOR SYSTEM
SHEET No.
5 of 27
DOCUMENT NUMBER:
SD-45560-001
CREATED / REVISED BY:
M. Simmel/D. Morgan
CHECKED BY:
M. Ibarra
APPROVED BY:
S. Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC