M38258MCM Datasheet, PDF (47/70 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

MITSUBISHI MICROCOMPUTERS
3825 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
Table 16. Electrical characteristics
(VCC =2.5 to 5.5 V, Ta = –20 to 85°C, unless otherwise noted)
Symbol
VRAM
Parameter
RAM retention voltage
ICC
Power source current
Test conditions
Limits
Unit
Min. Typ. Max.
At clock stop mode
2.0
5.5
V
• High-speed mode, VCC = 5 V
f(XIN) = 8 MHz
f(XCIN) = 32.768 kHz
6.4
13 mA
Output transistors “off”
A-D converter in operating
• High-speed mode, VCC = 5 V
f(XIN) = 8 MHz (in WIT state)
f(XCIN) = 32.768 kHz
1.6
3.2 mA
Output transistors “off”
A-D converter in operating
• Low-speed mode, VCC = 5 V, Ta ≤ 55°C
f(XIN) = stopped
f(XCIN) = 32.768 kHz
25
36 µA
Output transistors “off”
• Low-speed mode, VCC = 5 V, Ta = 25°C
f(XIN) = stopped
f(XCIN) = 32.768 kHz (in WIT state)
7.0
14 µA
Output transistors “off”
• Low-speed mode, VCC = 3 V, Ta ≤ 55°C
f(XIN) = stopped
f(XCIN) = 32.768 kHz
15
22 µA
Output transistors “off”
• Low-speed mode, VCC = 3 V, Ta ≤ 25°C
f(XIN) = stopped
f(XCIN) = 32.768 kHz (in WIT state)
4.5
9.0 µA
Output transistors “off”
VL1
Power source voltage
IL1
Power source current (VL1)
(Note)
All oscillation stopped Ta = 25 °C
(in STP state)
Output transistors “off” ^{Ta = 85 °C}
0.1
1.0
µA
10
When using voltage multiplier
VL1 = 1.8 V
VL1 < 1.3 V
1.3
1.8
2.3
V
3.0
6.0
µA
10
50
Note : When the voltage multiplier control bit of the LCD mode register (bit 4 at address 003916) is “1”.
47