M35053 Datasheet, PDF (44/47 Pages) Mitsubishi Electric Semiconductor – SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS

MITSUBISHI MICROCOMPUTERS
M35053-XXXSP/FP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
20P2Q-A (20-PIN SSOP) MARK SPECIFICATION FORM
Mitsubishi IC catalog name
Please choose one of the marking types below (A, B, C), and enter the Mitsubishi IC catalog name and the special mark (if needed).
A. Standard Mitsubishi Mark
20
11
Mitsubishi lot number
(6-digit or 7-digit)
Mitsubishi IC catalog name
Mitsubishi IC catalog name
1
10
B. Customer s Parts Number + Mitsubishi IC Catalog Name
20
11
ROM number (3-digit)
Mitsubishi lot number (4-digit)
1
10
C. Special Mark Required
20
11
1
10
Customer s Parts Number
Note: The fonts and size of characters are standard Mitsubishi type.
Mitsubishi IC catalog name and Mitsubishi lot number
Notes 1 : The mark field should be written right aligned.
2 : The fonts and size of characters are standard Mitsubishi
type.
3 : Customer s Parts Number can be up to 10 characters: Only
0 to 9, A to Z, +, -, /, (, ), &, ', . (period), and , (comma) are
usable.
4 : If the Mitsubishi logo is not required, check the box be-
low.
Mitsubishi logo is not required
Note 1 : If the Special Mark is to be Printed, indicate the desired
layout of the mark in the left figure. The layout will be du-
plicated as close as possible.
Mitsubishi lot number (4-digit) and Mask ROM
number (3-digit) are always marked.
2 : If the customer s trade mark logo must be used in the
Special Mark, check the box below.
Please submit a clean original of the logo.
For the new special character fonts, a clean font original
(ideally logo drawing) must be submitted.
Special logo required
Special Mark (Customer s Trade Mark)
Mitsubishi IC catalog name
44