JAN2N6782 Datasheet, PDF (2/9 Pages) Microsemi Corporation – This family of 2N6782, 2N6784 and 2N6786 switching transistors are military qualified up to the JANTXV level for high-reliability applications.

2N6782, 2N6784 and 2N6786
Notes: 1. Derate linearly 0.12 W/°C for TC > +25 °C.
2. The following formula derives the maximum theoretical ID limit. ID is also limited by package and internal wires and may be limited due to
pin diameter.
3. IDM = 4 x ID1 as calculated in note 1.
MECHANICAL and PACKAGING
• CASE: Hermetically sealed, kovar base, nickel cap.
• TERMINALS: Tin/lead solder dip nickel plate or RoHS compliant pure tin plate (commercial grade only).
• MARKING: Part number, date code, manufacturer’s ID.
• WEIGHT: Approximately 1.064 grams.
• See Package Dimensions on last page.
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
JANTXV = JANTXV Level
Blank = Commercial
JEDEC type number
(see Electrical Characteristics
table)
PART NOMENCLATURE
JAN 2N6782 (e3)
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
Symbol
di/dt
I_F
R_G
V _DD
V _DS
V _GS
SYMBOLS & DEFINITIONS
Definition
Rate of change of diode current while in reverse-recovery mode, recorded as maximum value.
Forward current
Gate drive impedance
Drain supply voltage
Drain source voltage, dc
Gate source voltage, dc
T4-LDS-0064, Rev. 3 (121467)
©2012 Microsemi Corporation
Page 2 of 9