|
PD671XXX-8 Datasheet, PDF (1/14 Pages) Microsemi Corporation – 24-Channel PoE AF and AT DIMM | |||
|
PD671xxx - 8 / 12 / 24-Channel PoE AF and AT DIMM
Data Sheet (Non-confidential)
DESCRIPTION
Microsemiâs⢠new and unique family of Power over Ethernet
(PoE) modules enable next-generation network devices to
share data and power over the same cable. The PD671xxx
PoE PSE modules are fit / form compatible with the standard
plug-in memory modules used in personal computers (Dual
Inline Memory Modules - DIMMs) (see Figure 1 and Figure 12).
Thus, the use of these modules permit network devices to be
designed for up to 96 ports, with fewer ports actually installed.
Additional modules can be inserted in the field at any time.
The PD671xxx (8, 12 or 24 ports DIMM) includes a wide range
of functions. Some of these modules include the PD69000
micro-controller unit (PoE controller) for Enhanced features and
a flexible work environment in a DIMM master or DIMM slave
configuration (refer to Ordering Information, page 2).
Microsemiâs PoE PD671xxx DIMMs implement real time
mechanisms including detection, classification, port real-time
protection and system level functions (power management and
MIB support).
Microsemiâs PD69012 IC, 12-channel PoE Manager IC is at the
heart of these modules. PD671xxx DIMMs enable the
detection of IEEE802.3at-2009 Type 1 (low power) or Type 2
(high power) Powered Devices (PDs), ensuring safe power
feeding and removal over Ethernet ports. The PD69012-based
DIMMs detect and disable disconnected ports, using DC or AC
disconnection methods. The DIMMs are embedded in multi-
port and highly populated Ethernet switches, requiring a
minimum of external components.
The PD671xxx DIMM is fully backwards compatible with the
PD670xx DIMM and can be dropped into existing designs.
Figure 1: PoE PD67124 DIMM
IMPORTANT: For the most current data, consult Microsemiâs website:
http://www.microsemi.com
KEY FEATURES
 IEEE 802.3AT-2009 and
IEEE802.3AF-2003 compliant
 Up to 30 W per port power PoE
solution
 RoHS compliant
 Supports IETF PoE MIB (RFC 3621)
 Up to 24 power ports per single DIMM
 Up to 96 ports in a system, using
master and slave configuration
 Thermal protection per port
 Thermal monitoring capabilities
 Pre-standard detection methods
(Cisco Inline Power and Power over
LAN Legacy)
 Non-standard terminals supported
 DC disconnect with DC modulation
 AC disconnect function utilizing
external diodes
 PD 2-events classification function
 Operates using a single input (44 to
57 VDC)
 I2C or UART host interface
 Host communication is backward
compatible with PD67024M
communication, or Marvell® ISSR
 Programmable over current protection
per port
 Built-in power management algorithm
 Internal power-on reset mechanism
 Fast port shutdown on power supply
failure
 Supports Backplane Power
Management
 Automatic on/off sequencer for 96
ports
 Disable/enable power per port
 Continuous port current monitoring
 Serial interface for LED indicator
support
 Backwards compatible with PD670xx
 Fit/form compliant with168-pin DIMM
JEDEC MO-161F, 3.3 V
 Space efficient compact design
 Factory pre-tested, for plug-and-play
integration
 Safety standard compliant: UL / cUL
per UL60950-1 (mounted on
Microsemi evaluation board)
|
▷ |