HAL401 Datasheet, PDF (8/20 Pages) Micronas – Linear Hall-Effect Sensor IC

HAL401
DATA SHEET
3.2. Dimensions of Sensitive Area
0.37 mm x 0.17 mm
3.3. Position of Sensitive Area
SOT89B-1
y 0.95 mm nominal
3.4. Absolute Maximum Ratings
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute maxi-
mum rating conditions for extended periods will affect device reliability.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than absolute
maximum-rated voltages to this circuit.
All voltages listed are referenced to ground (GND).
Symbol
V_DD
V_O
I_O
T_J
T_A
Parameter
Supply Voltage
Output Voltage
Continuous Output Current
Junction Temperature Range
Ambient Temperature
at V_DD = 5 V
at V_DD = 12 V
Pin No.
1
2, 3
2, 3
Min.
–12
–0.3
–5
–40
–
–
Max.
Unit
12
V
12
V
5
mA
170
°C
150
°C
125
°C
3.4.1. Storage and Shelf Life
The permissible storage time (shelf life) of the sensors is unlimited, provided the sensors are stored at a maximum of
30 °C and a maximum of 85% relative humidity. At these conditions, no Dry Pack is required.
Solderability is guaranteed for one year from the date code on the package.
8
Micronas