English
Language : 

HAL710_1 Datasheet, PDF (15/19 Pages) Micronas – Hall-Effect Sensors with Direction Detection
DATA SHEET
HAL 710, HAL 730
4. Type Description
4.1. HAL 710, HAL 730
The types differ according to the behavior of the Direc-
tion Output (see Section 1.2. on page 4).
Magnetic Features
– typical BON: 14.9 mT at room temperature
– typical BOFF: −14.9 mT at room temperature
– temperature coefficient of −2000 ppm/K in all mag-
netic characteristics
– operation with static magnetic fields and dynamic
magnetic fields up to 10 kHz
Output Voltage
VO
BHYS
BOFF
0
BON
VOL
B
Fig. 4–1: Definition of magnetic switching points for
the HAL 710
Positive flux density values refer to magnetic south
pole at the branded side of the package.
Applications
The HAL 710 and the HAL 730 are the optimal sen-
sors for position−control applications with direction
detection and alternating magnetic signals such as:
– multipole magnet applications,
– rotating speed and direction measurement,
position tracking (active targets), and
– window lifters.
Magnetic Thresholds
(quasi stationary: dB/dt<0.5 mT/ms)
at TJ = −40 °C to +140 °C, VDD = 3.8 V to 24 V,
as not otherwise specified
Typical characteristics for TJ = 25 °C and VDD = 5 V
Para-
meter
Tj
−40 °C
On-Point
BS1on, BS2on
Min. Typ. Max.
12.5 16.3 20
Off-Point
BS1off,, BS2off
Min. Typ. Max.
Unit
−20 −16.3 −12.5 mT
25 °C 10.7 14.9 19.1 −19.1 −14.9 −10.7 mT
100 °C 7.7 12.5 17.3 −17.3 −12.5 −7.7 mT
140 °C 6.0 10.9 16.0 −16.0 −10.9 −6.0 mT
Matching BS1 and BS2
(quasi stationary: dB/dt<0.5 mT/ms)
at TJ = −40 °C to +140 °C, VDD = 3.8 V to 24 V,
as not otherwise specified
Typical characteristics for TJ = 25 °C and VDD = 5 V
Para-
meter
BS1on − BS2on
BS1off − BS2off
Unit
Tj
−40 °C
Min.
−7.5
Typ.
0
Max. Min.
7.5 −7.5
Typ.
0
Max.
7.5 mT
25 °C −7.5 0
7.5 −7.5 0
7.5 mT
100 °C −7.5 0
7.5 −7.5 0
7.5 mT
140 °C −7.5 0
7.5 −7.5 0
7.5 mT
Hysteresis Matching
(quasi stationary: dB/dt<0.5 mT/ms)
at TJ = −40 °C to +140 °C, VDD = 3.8 V to 24 V,
as not otherwise specified
Typical characteristics for TJ = 25 °C and VDD = 5 V
Parameter
Tj
−40 °C
(BS1on − BS1off) / (BS2on − BS2off)
Min.
Typ.
Max.
0.85
1.0
1.2
25 °C 0.85
1.0
1.2
100 °C 0.85
1.0
1.2
140 °C 0.85
1.0
1.2
Unit
-
-
-
−
Micronas
Oct. 13, 2009; DSH000031_002EN
15