HAL710_1 Datasheet, PDF (10/19 Pages) Micronas – Hall-Effect Sensors with Direction Detection

HAL 710, HAL 730
DATA SHEET
3.2. Dimensions of Sensitive Area
0.25 mm × 0.12 mm
3.3. Positions of Sensitive Areas
x₁ + x₂
x₁ = x₂
y
SOT89B-2
(2.35±0.001) mm
1.175 mm
0.975 mm
3.4. Absolute Maximum Ratings
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute
maximum rating conditions for extended periods will affect device reliability.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-
lute maximum-rated voltages to this high-impedance circuit.
All voltages listed are referenced to ground (GND).
Symbol
Parameter
V_DD
Supply Voltage
V_O
Output Voltage
I_O
Continuous Output Current
T_J
Junction Temperature Range
1) _{as long as TJmax is not exceeded}
Pin No.
1
2, 3
2, 3
Min.
−15
−0.3
−
−40
Max.
28¹⁾
28¹⁾
20¹⁾
170
Unit
V
V
mA
°C
3.4.1. Storage and Shelf Life
The permissible storage time (shelf life) of the sensors is unlimited, provided the sensors are stored at a maximum of
30 °C and a maximum of 85% relative humidity. At these conditions, no Dry Pack is required.
Solderability is guaranteed for one year from the date code on the package.
3.5. Recommended Operating Conditions
Functional operation of the device beyond those indicated in the “Recommended Operating Conditions” of this spec-
ification is not implied, may result in unpredictable behavior of the device and may reduce reliability and lifetime.
All voltages listed are referenced to ground (GND).
Symbol
V_DD
I_O
V_O
Parameter
Pin No.
Supply Voltage
1
Continuous Output Current
3
Output Voltage (output switch off) 3
Min.
3.8
0
0
Typ.
−
−
−
Max.
Unit
24
V
10
mA
24
V
10
Oct. 13, 2009; DSH000031_002EN
Micronas