HAL556_1 Datasheet, PDF (12/26 Pages) Micronas – Two-Wire Hall-Effect Sensor Family

HAL55x, HAL56x
DATA SHEET
3.2. Dimensions of Sensitive Area
0.25 mm × 0.12 mm
3.3. Positions of Sensitive Areas
SOT89B-1
y 0.95 mm nominal
A4 0.3 mm nominal
D1
TO92UA-1/-2
1.0 mm nominal
0.3 mm nominal
3.05 mm ±50 μm
3.4. Absolute Maximum Ratings
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute
maximum rating conditions for extended periods will affect device reliability.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-
lute maximum-rated voltages to this circuit.
All voltages listed are referenced to ground (GND).
Symbol
Parameter
Pin No.
Min.
Max.
Unit
V_DD
Supply Voltage
1
−15¹⁾²⁾
28²⁾
V
T_J
Junction Temperature Range
−40
170
°C
1) _{−18 V with a 100 Ω series resistor at pin 1 (−16 V with a 30 Ω series resistor)}
2) _{as long as TJmax is not exceeded}
3.4.1. Storage and Shelf Life
The permissible storage time (shelf life) of the sensors is unlimited, provided the sensors are stored at a maximum of
30 °C and a maximum of 85% relative humidity. At these conditions, no Dry Pack is required.
Solderability is guaranteed for one year from the date code on the package.
12
Aug. 11, 2009; DSH000026_004EN
Micronas