N25Q256A13EF840F Datasheet, PDF (90/90 Pages) Micron Technology – Micron Serial NOR Flash Memory

3V, 256Mb: Multiple I/O Serial Flash Memory
Revision History
Rev. F, Preliminary – 07/11
• Miscellaneous edits, including correction of V-PDFN 8 x 6 package and clarification of
feature set option 7.
Rev. E, Preliminary – 05/11
• Added W# to logic diagram in Device Description
• Cross-reference update to Status Register Bit Definitions table
• Added dummy clock and quad SPI protocol information to Command Definitions
notes
• Corrected Manufacturer ID values
• Removed extraneous frequency requirement note from READ IDENTIFICATIONS Op-
erations
• Corrected timing diagram notes in READ MEMORY Operations
• Corrected timing diagram notes in PROGRAM Operations
• Changed WIP = 1 to WIP = 0 in Power-Up Timing diagram in Power Up and Power
Down
Rev. D, Preliminary – 05/11
• Micron rebrand
Rev. C – 11/10
• Added Reset Enable; Read Extended Address Register, Dual I/O; Reset Enable and Re-
set Memory, Dual I/O; Read Extended Address Register, Quad I/O; Reset Enable and
Reset Memory, Quad I/O
Rev. B – 08/10
• Added information to clarify 4-Byte Address Mode; added reset information, includ-
ing the Reset Enable figure and new rows the Reset Conditions table
Rev. A – 06/10
• Initial release
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: [phone]
www.micron.com/productsupport Customer Comment Line: 800-932-4992
Micron and the Micron logo are trademarks of Micron Technology, Inc.
All other trademarks are the property of their respective owners.
This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein.
Although considered final, these specifications are subject to change, as further product development and data characterization some-
times occur.
PDF: 09005aef84566603
n25q_256mb_65nm.pdf - Rev. O 12/12 EN
90
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.