DSPIC33EPXXX806 Datasheet, PDF (519/614 Pages) Microchip Technology – 16-bit Microcontrollers and Digital Signal Controllers (up to 512 KB Flash and 52 KB SRAM) with High-Speed PWM, USB, and Advanced Analog

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
FIGURE 32-11:
HIGH-SPEED PWM MODULE FAULT TIMING CHARACTERISTICS
(dsPIC33EPXXX(MC/MU)806/810/814 DEVICES ONLY)
Fault Input
(active-low)
PWMx
MP30
MP20
FIGURE 32-12:
HIGH-SPEED PWM MODULE TIMING CHARACTERISTICS
(dsPIC33EPXXX(MC/MU)806/810/814 DEVICES ONLY)
MP11 MP10
PWMx
Note: Refer to Figure 32-1 for load conditions.
TABLE 32-30: HIGH-SPEED PWM MODULE TIMING REQUIREMENTS
(dsPIC33EPXXX(MC/MU)806/810/814 DEVICES ONLY)
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param. Symbol
Characteristic⁽¹⁾
Min. Typ. Max. Units
Conditions
MP10 TFPWM PWM Output Fall Time
—
—
—
ns
MP11 TRPWM PWM Output Rise Time
—
—
—
ns
MP20 ^TFD
Fault Input ↓ to PWM
I/O Change
—
—
15
ns
MP30 TFH
Fault Input Pulse Width
15
—
—
ns
Note 1: These parameters are characterized but not tested in manufacturing.
See parameter DO32
See parameter DO31
—
—
© 2009-2012 Microchip Technology Inc.
Preliminary
DS70616F-page 519