English
Language : 

DSPIC33FJ64GP204-I Datasheet, PDF (394/436 Pages) Microchip Technology – 16-bit Digital Signal Controllers (up to 128 KB Flash and 16K SRAM) with Advanced Analog
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, AND dsPIC33FJ128GPX02/X04
TABLE 31-6: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +150°C for High
Temperature
Param. Symbol
Characteristic
Min. Typ. Max. Units
Conditions
DO10 VOL
DO20 VOH
DO20A VOH1
Output Low Voltage
I/O Pins:
2x Sink Driver Pins - RA2, RA7- —
RA10, RB10, RB11, RB7, RB4,
RC3-RC9
Output Low Voltage
I/O Pins:
4x Sink Driver Pins - RA0, RA1, —
RB0-RB3, RB5, RB6, RB8, RB9,
RB12-RB15, RC0-RC2
Output Low Voltage
I/O Pins:
—
8x Sink Driver Pins - RA3, RA4
Output High Voltage
I/O Pins:
2x Source Driver Pins - RA2,
2.4
RA7-RA10, RB4, RB7, RB10,
RB11, RC3-RC9
Output High Voltage
I/O Pins:
4x Source Driver Pins - RA0,
2.4
RA1, RB0-RB3, RB5, RB6, RB8,
RB9, RB12-RB15, RC0-RC2
Output High Voltage
I/O Pins:
8x Source Driver Pins - RA4,
2.4
RA3
Output High Voltage
I/O Pins:
1.5
2x Source Driver Pins - RA2,
RA7-RA10, RB4, RB7, RB10,
2.0
RB11, RC3-RC9
3.0
Output High Voltage
4x Source Driver Pins - RA0,
1.5
RA1, RB0-RB3, RB5, RB6, RB8,
RB9, RB12-RB15, RC0-RC2
2.0
3.0
Output High Voltage
I/O Pins:
1.5
8x Source Driver Pins - RA3,
RA4
2.0
3.0
Note 1: Parameters are characterized, but not tested.
— 0.4
— 0.4
— 0.4
——
——
——
——
——
——
——
——
——
——
——
——
V
IOL ≤1.8 mA, VDD = 3.3V
See Note 1
V
IOL ≤3.6 mA, VDD = 3.3V
See Note 1
V
IOL ≤6 mA, VDD = 3.3V
See Note 1
V
IOL ≥ -1.8 mA, VDD = 3.3V
See Note 1
V
IOL ≥ -3 mA, VDD = 3.3V
See Note 1
V
IOL ≥ -6 mA, VDD = 3.3V
See Note 1
IOH ≥ -1.9 mA, VDD = 3.3V
See Note 1
V
IOH ≥ -1.85 mA, VDD = 3.3V
See Note 1
IOH ≥ -1.4 mA, VDD = 3.3V
See Note 1
IOH ≥ -3.9 mA, VDD = 3.3V
See Note 1
V
IOH ≥ -3.7 mA, VDD = 3.3V
See Note 1
IOH ≥ -2 mA, VDD = 3.3V
See Note 1
IOH ≥ -7.5 mA, VDD = 3.3V
See Note 1
V
IOH ≥ -6.8 mA, VDD = 3.3V
See Note 1
IOH ≥ -3 mA, VDD = 3.3V
See Note 1
DS70292G-page 394
© 2007-2012 Microchip Technology Inc.