|
DSPIC33FJ64GP204-I Datasheet, PDF (1/436 Pages) Microchip Technology – 16-bit Digital Signal Controllers (up to 128 KB Flash and 16K SRAM) with Advanced Analog | |||
|
dsPIC33FJ32GP302/304,
dsPIC33FJ64GPX02/X04, and
dsPIC33FJ128GPX02/X04
16-bit Digital Signal Controllers (up to 128 KB Flash and
16K SRAM) with Advanced Analog
Operating Conditions
⢠3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
⢠3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
Clock Management
⢠2% internal oscillator
⢠Programmable PLL and oscillator clock sources
⢠Fail-Safe Clock Monitor (FSCM)
⢠Independent Watchdog Timer
⢠Low-power management modes
⢠Fast wake-up and start-up
Core Performance
⢠Up to 40 MIPS 16-bit dsPIC33F CPU
⢠Single-cycle MUL plus hardware divide
Advanced Analog Features
⢠10/12-bit ADC with 1.1Msps/500 ksps rate:
- Up to 13 ADC input channels and four S&H
- Flexible/Independent trigger sources
⢠150 ns Comparators:
- Up to two Analog Comparator modules
- 4-bit DAC with two ranges for Analog Comparators
Input/Output
⢠Software remappable pin functions
⢠5V-tolerant pins
⢠Selectable open drain and internal pull-ups
⢠Up to 5 mA overvoltage clamp current/pin
⢠Multiple external interrupts
Packages
Type
SPDIP
SOIC
Pin Count
28
28
I/O Pins
21
21
Contact Lead/Pitch
.100â
1.27
Dimensions
.285x.135x1.365â
7.50x2.05x17.9
Note: All dimensions are in millimeters (mm) unless specified.
System Peripherals
⢠16-bit dual channel 100 ksps Audio DAC
⢠Cyclic Redundancy Check (CRC) module
⢠Up to five 16-bit and up to two 32-bit Timers/
Counters
⢠Up to four Input Capture (IC) modules
⢠Up to four Output Compare (OC) modules
⢠Real-Time Clock and Calendar (RTCC) module
Communication Interfaces
⢠Parallel Master Port (PMP)
⢠Two UART modules (10 Mbps)
- Supports LIN 2.0 protocols
- RS-232, RS-485, and IrDA® support
⢠Two 4-wire SPI modules (15 Mbps)
⢠Enhanced CAN (ECAN) module (1 Mbaud) with
2.0B support
⢠I2C module (100K, 400K and 1Mbaud) with
SMbus support
⢠Data Converter Interface (DCI) module with I2S
codec support
Direct Memory Access (DMA)
⢠8-channel DMA with no CPU stalls or overhead
⢠UART, SPI, ADC, ECAN, IC, OC, INT0
Qualification and Class B Support
⢠AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
⢠Class B Safety Library, IEC 60730, VDE certified
Debugger Development Support
⢠In-circuit and in-application programming
⢠Two program breakpoints
⢠Trace and run-time watch
QFN-S
28
21
0.65
6x6x0.9
QFN
44
35
0.65
8x8x0.9
TQFP
44
35
0.80
10x10x1
© 2007-2012 Microchip Technology Inc.
DS70292G-page 1
|
▷ |