DSPIC33FJ06GS001_12 Datasheet, PDF (302/352 Pages) Microchip Technology – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, ADC and Comparators

dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302
TABLE 25-35: SPIx SLAVE MODE (FULL-DUPLEX, CKE = 0, CKP = 1, SMP = 0)
TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param
No.
Symbol
Characteristic⁽¹⁾
Min
Typ⁽²⁾ Max Units
Conditions
SP70 TscP
SP72 TscF
Maximum SCKx Input Frequency
—
SCKx Input Fall Time
—
SP73 TscR
SCKx Input Rise Time
—
SP30 TdoF
SDOx Data Output Fall Time
—
SP31 TdoR
SDOx Data Output Rise Time
—
SP35 TscH2doV, SDOx Data Output Valid after
—
TscL2doV SCKx Edge
SP36 TdoV2scH, SDOx Data Output Setup to
30
TdoV2scL First SCKx Edge
SP40 TdiV2scH, Setup Time of SDIx Data Input
30
TdiV2scL to SCKx Edge
SP41 TscH2diL, Hold Time of SDIx Data Input
30
TscL2diL to SCKx Edge
SP50 TssL2scH, SSx  to SCKx  or SCKx Input
120
TssL2scL
SP51 TssH2doZ SSx  to SDOx Output
10
High-Impedance
—
15 MHz See Note 3
—
—
ns See Parameter
DO32 and Note 4
—
—
ns See Parameter
DO31 and Note 4
—
—
ns See Parameter
DO32 and Note 4
—
—
ns See Parameter
DO31 and Note 4
6
20
ns
—
—
ns
—
—
ns
—
—
ns
—
—
ns
—
50
ns See Note 4
SP52 TscH2ssH SSx after SCKx Edge
TscL2ssH
1.5 TCY + 40 —
—
ns See Note 4
Note 1: These parameters are characterized, but are not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
3: The minimum clock period for SCKx is 66.7 ns. Therefore, the SCKx clock generated by the master must
not violate this specification.
4: Assumes 50 pF load on all SPIx pins.
DS75018C-page 302
 2011-2012 Microchip Technology Inc.