DSPIC33FJ16GS504T-E Datasheet, PDF (291/346 Pages) Microchip Technology – High-Performance, 16-bit Digital Signal Controllers

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
TABLE 24-9: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for
Extended
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
VIL
Input Low Voltage
DI10
I/O Pins
VSS
— 0.2 VDD V
DI15
MCLR
VSS
— 0.2 VDD V
DI16
I/O Pins with OSC1
VSS
— 0.2 VDD V
DI18
I/O Pins with SDAx, SCLx
VSS
— 0.3 VDD V SMbus disabled
DI19
I/O Pins with SDAx, SCLx
VSS
— 0.2 VDD V SMbus enabled
VIH
DI20
DI21
Input High Voltage
I/O Pins Not 5V Tolerant⁽⁴⁾
I/O Pins 5V Tolerant⁽⁴⁾
0.7 VDD —
VDD
V
0.7 VDD —
5.5
V
ICNPU CNx Pull-up Current
DI30
IIL
Input Leakage Current^(2,3,4)
—
250
—
μA VDD = 3.3V, VPIN = VSS
DI50
I/O Pins with:
4 mA Source/Sink Capability
8 mA Source/Sink Capability
16 mA Source/Sink Capability
—
±2
—
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
—
±4
—
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
—
±8
—
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
DI55
MCLR
—
—
±2
μA VSS ≤ VPIN ≤ VDD
DI56
OSC1
—
—
±2
μA VSS ≤ VPIN ≤ VDD,
XT and HS modes
ISINK Sink Current
Pins:
RA3, RA4, RB3, RB4, RB11-RB14
—
16
— mA
Pins:
RC3-RC8, RC11-RC13
—
8
— mA
Pins:
RA0-RA2, RB0, RB1, RB5-RB10,
—
4
— mA
RB15, RC1, RC2, RC9, RC10
Note 1:
2:
3:
4:
Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
Negative current is defined as current sourced by the pin.
See “Pin Diagrams” for the list of 5V tolerant I/O pins.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 289