DSPIC33FJ16GS504T-E Datasheet, PDF (249/346 Pages) Microchip Technology – High-Performance, 16-bit Digital Signal Controllers

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 19-2: ADSTAT: A/D STATUS REGISTER
U-0
U-0
U-0
—
—
—
bit 15
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
bit 8
U-0
—
bit 7
R/C-0, HS
P6RDY⁽¹⁾
R/C-0, HS
P5RDY⁽²⁾
R/C-0, HS
P4RDY⁽²⁾
R/C-0, HS
P3RDY⁽³⁾
R/C-0, HS
P2RDY⁽⁴⁾
R/C-0, HS
P1RDY
R/C-0, HS
P0RDY
bit 0
Legend:
R = Readable bit
-n = Value at POR
C = Clearable bit
W = Writable bit
‘1’ = Bit is set
HS = Hardware Settable bit
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Unimplemented: Read as ‘0’
P6RDY: Conversion Data for Pair 6 Ready bit⁽¹⁾
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
P5RDY: Conversion Data for Pair 5 Ready bit⁽²⁾
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
P4RDY: Conversion Data for Pair 4 Ready bit⁽²⁾
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
P3RDY: Conversion Data for Pair 3 Ready bit⁽³⁾
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
P2RDY: Conversion Data for Pair 2 Ready bit⁽⁴⁾
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
P1RDY: Conversion Data for Pair 1 Ready bit
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
P0RDY: Conversion Data for Pair 0 Ready bit
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
Note 1: This bit is available in the dsPIC33FJ16GS502, dsPIC33FJ16GS504 and dsPIC33FJ06GS202 devices
only.
2: This bit is available in the dsPIC33FJ16GS504 devices only.
3: This bit is available in the dsPIC33FJ16GS402/404, dsPIC33FJ16GS502, dsPIC33FJ16GS504 and
dsPIC33FJ06GS101 devices only.
4: This bit is available in the dsPIC33FJ16GS504 and dsPIC33FJ16GS502 devices only.
© 2009 Microchip Technology Inc.
Preliminary
DS70318D-page 247