PIC16F722A Datasheet, PDF (205/284 Pages) Microchip Technology – 28-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16F/LF722A/723A
23.3 DC Characteristics: PIC16F/LF722A/723A-I/E (Power-Down) (Continued)
PIC16LF722A/723A
PIC16F722A/723A
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
D027
Device Characteristics Min.
Power-down Base Current (IPD)⁽²⁾
—
—
Typ†
0.06
0.08
Max.
+85°C
Max.
+125°C
Units
0.7
5.0
A
1.0
5.5
A
Conditions
VDD
Note
1.8 A/D Current (Note 1, Note 4), no
3.0 ^{conversion in progress}
D027
D027A
D027A
—
6
10.7
18
A
1.8 A/D Current (Note 1, Note 4), no
—
7
10.6
20
A
3.0 ^{conversion in progress}
—
7.2 11.9
22
A
5.0
— 250 400
—
A
1.8 A/D Current (Note 1, Note 4),
— 250 400
—
A
3.0 ^{conversion in progress}
— 280 430
—
A
1.8 A/D Current (Note 1, Note 4,
— 280 430
—
A
3.0 ^{Note 5), conversion in progress}
— 280 430
—
A
5.0
D028
D028
D028A
D028A
—
2.2
3.2
14.4
A
1.8 Cap Sense Low Power
—
3.3
4.4
15.6
A
3.0 ^{Oscillator mode}
—
6.5
13
—
8
14
21
A
1.8 Cap Sense Low Power
23
A
3.0 ^{Oscillator mode}
—
8
14
25
A
5.0
—
4.2
6
—
6
7
17
A
1.8 Cap Sense Medium Power
18
A
3.0 ^{Oscillator mode}
—
8.5 15.5
23
A
1.8 Cap Sense Medium Power
—
11
17
24
A
3.0 ^{Oscillator mode}
D028B
D028B
—
11
18
—
12
14
—
32
35
—
16
20
—
36
41
—
42
49
27
A
5.0
25
A
1.8 Cap Sense High Power
44
A
3.0 ^{Oscillator mode}
31
A
1.8 Cap Sense High Power
50
A
3.0 ^{Oscillator mode}
58
A
5.0
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.
3: Fixed Voltage Reference is automatically enabled whenever the BOR is enabled.
4: A/D oscillator source is FRC.
5: 0.1 F capacitor on VCAP (RA0).
 2010 Microchip Technology Inc.
DS41417A-page 205