PIC16F722A Datasheet, PDF (204/284 Pages) Microchip Technology – 28-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16F/LF722A/723A
23.3 DC Characteristics: PIC16F/LF722A/723A-I/E (Power-Down)
PIC16LF722A/723A
PIC16F722A/723A
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
D020
D020
D021
D021
Device Characteristics Min.
Power-down Base Current (IPD)⁽²⁾
—
—
—
—
—
—
—
—
Typ†
0.02
0.08
4.3
5
5.5
0.5
0.8
6
Max.
+85°C
Max.
+125°C
Units
0.7
3.9
A
1.0
4.3
A
10.2
17
A
10.5
18
A
11.8
21
A
1.7
4.1
A
2.5
4.8
A
13.5 16.4 A
Conditions
VDD
Note
1.8 WDT, BOR, FVR, and T1OSC
3.0 ^{disabled, all Peripherals Inactive}
1.8 WDT, BOR, FVR, and T1OSC
3.0 ^{disabled, all Peripherals Inactive}
5.0
1.8 LPWDT Current (Note 1)
3.0
1.8 LPWDT Current (Note 1)
—
6.5 14.5 16.8 A
3.0
D021A
—
7.5
16
18.7 A
5.0
—
8.5
14
19
A
1.8 FVR current (Note 1. Note 3)
—
8.5
14
20
A
3.0
D021A
D022
—
23
44
—
25
45
—
26
60
—
—
—
—
7.5
12
48
A
1.8 FVR current (Note 1, Note 3,
55
A
3.0 ^{Note 5)}
70
A
5.0
—
A
1.8 BOR Current (Note 1, Note 3)
22
A
3.0
D022
—
—
—
—
23
42
—
25
46
—
A
1.8 BOR Current (Note 1, Note 3,
49
A
3.0 ^{Note 5)}
50
A
5.0
D026
D026
†
Note 1:
2:
3:
4:
5:
—
0.6
2
—
A
1.8 T1OSC Current (Note 1)
—
1.8
3.0
—
A
3.0
—
4.5 11.1
—
A
1.8 T1OSC Current (Note 1)
—
6
12.5
—
A
3.0
—
7
13.5
—
A
5.0
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.
Fixed Voltage Reference is automatically enabled whenever the BOR is enabled.
A/D oscillator source is FRC.
0.1 F capacitor on VCAP (RA0).
DS41417A-page 204
 2010 Microchip Technology Inc.