PIC24FV32KA304-I Datasheet, PDF (199/320 Pages) Microchip Technology – 20/28/44/48-Pin, General Purpose, 16-Bit Flash Microcontrollers with XLP Technology

PIC24FV32KA304 FAMILY
REGISTER 19-11: RTCCSWT: CONTROL/SAMPLE WINDOW TIMER REGISTER⁽¹⁾
R/W-x
PWCSTAB7
bit 15
R/W-x
PWCSTAB6
R/W-x
PWCSTAB5
R/W-x
PWCSTAB4
R/W-x
PWCSTAB3
R/W-x
PWCSTAB2
R/W-x
PWCSTAB1
R/W-x
PWCSTAB0
bit 8
R/W-x
R/W-x
R/W-x
R/W-x
R/W-x
R/W-x
R/W-x
R/W-x
PWCSAMP7 PWCSAMP6 PWCSAMP5 PWCSAMP4 PWCSAMP3 PWCSAMP2 PWCSAMP1 PWCSAMP0
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-8
bit 7-0
PWCSTAB<7:0>: PWM Stability Window Timer bits
11111111 = Stability window is 255 TPWCCLK clock periods
.
.
.
00000000 = Stability window is 0 TPWCCLK clock periods
The sample window starts when the alarm event triggers. The stability window timer starts counting
from every alarm event when PWCEN = 1.
PWCSAMP<7:0>: PWM Sample Window Timer bits
11111111 = Sample window is always enabled, even when PWCEN = 0
11111110 = Sample window is 254 TPWCCLK clock periods
.
.
.
00000000 = Sample window is 0 TPWCCLK clock periods
The sample window timer starts counting at the end of the stability window when PWCEN = 1. If
PWCSTAB<7:0> = 0, the sample window timer starts counting from every alarm event when
PWCEN = 1.
Note 1: Writes to this register are only allowed when RTCWREN = 1.
 2011 Microchip Technology Inc.
DS39995B-page 199