English
Language : 

DSPIC30F5013-20I Datasheet, PDF (172/220 Pages) Microchip Technology – 16-bit Digital Signal Controllers
◁
dsPIC30F5011/5013
TABLE 23-11: ELECTRICAL CHARACTERISTICS: BOR
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ(1) Max Units
Conditions
BO10
BO15
VBOR
BOR Voltage(2) on
BORV = 11(3) —
—
—
V Not in operating
VDD transition high to
range
low
BORV = 10 2.60 — 2.71 V
BORV = 01 4.10 — 4.40 V
BORV = 00 4.58 — 4.73 V
VBHYS
—
5
— mV
Note 1:
2:
3:
Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
These parameters are characterized but not tested in manufacturing.
11 values not in usable operating range.
TABLE 23-12: DC CHARACTERISTICS: PROGRAM AND EEPROM
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ(1) Max Units
Conditions
Data EEPROM Memory(2)
D120 ED
Byte Endurance
100K 1M
D121 VDRW VDD for Read/Write
VMIN —
— E/W
5.5
V
D122
D123
TDEW Erase/Write Cycle Time
TRETD Characteristic Retention
0.8
2
40 100
2.6 ms
— Year
D124 IDEW IDD During Programming
—
10
30 mA
Program FLASH Memory(2)
D130 EP
Cell Endurance
10K 100K — E/W
D131 VPR
VDD for Read
VMIN —
5.5
V
D132
D133
D134
D135
VEB
VPEW
TPEW
TRETD
VDD for Bulk Erase
VDD for Erase/Write
Erase/Write Cycle Time
Characteristic Retention
4.5 —
3.0 —
0.8
2
40 100
5.5
V
5.5
V
2.6 ms
— Year
D137 IPEW IDD During Programming
—
10
30 mA
D138 IEB
IDD During Programming
—
10
30 mA
Note 1: Data in “Typ” column is at 5V, 25°C unless otherwise stated.
2: These parameters are characterized but not tested in manufacturing.
-40° C ≤TA ≤+85°C
Using EECON to read/write
VMIN = Minimum operating
voltage
RTSP
Provided no other specifications
are violated
Row Erase
-40° C ≤TA ≤+85°C
VMIN = Minimum operating
voltage
RTSP
Provided no other specifications
are violated
Row Erase
Bulk Erase
DS70116J-page 172
© 2011 Microchip Technology Inc.
 ▷