PIC24FJ256GA110 Datasheet, PDF (16/22 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit General Purpose Flash Microcontrollers with Peripheral Pin Select

PIC24FJ256GA110 FAMILY
5. Module: Electrical Specifications
In Section 28.0 “Electrical Characteristics”,
under Absolute Maximum Ratings on Page 269,
the “Ambient temperature under bias” has been
changed to -40°C to +135°C.
6. Module: Electrical Specifications
In Section 28.0 “Electrical Characteristics”,
Table 28-8 (DC Characteristics: I/O Pin Output
Specifications) has been replaced with Table 3
below:
TABLE 3: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param
No.
Sym
Characteristic
Min
Typ⁽¹⁾ Max Units
Conditions
VOL Output Low Voltage
DO10
I/O Ports
—
—
0.4
V IOL = 8.5 mA, VDD = 3.6V
—
—
0.4
V IOL = 5.0 mA, VDD = 2.0V
DO16
I/O Ports
—
—
0.4
V IOL = 8.0 mA, VDD = 3.6V, +125°C
—
—
0.4
V IOL = 4.5 mA, VDD = 2.0V, +125°C
VOH Output High Voltage
DO20
I/O Ports
3.0
—
—
V IOH = -3.0 mA, VDD = 3.6V
2.4
—
—
V IOH = -6.0 mA, VDD = 3.6V
1.65
—
—
V IOH = -1.0 mA, VDD = 2.0V
1.4
—
—
V IOH = -3.0 mA, VDD = 2.0V
DO26
I/O Ports
3.0
—
—
V IOH = -2.5 mA, VDD = 3.6V, +125°C
1.65
—
—
V IOH = -0.5 mA, VDD = 2.0V, +125°C
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
DS80368N-page 16
 2008-2013 Microchip Technology Inc.