PIC24FJ256GA110 Datasheet, PDF (1/22 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit General Purpose Flash Microcontrollers with Peripheral Pin Select

PIC24FJ256GA110 FAMILY
PIC24FJ256GA110 Family
Silicon Errata and Data Sheet Clarification
The PIC24FJ256GA110 family devices that you have
received conform functionally to the current Device Data
Sheet (DS39905E), except for the anomalies described
in this document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in Table 1. The silicon issues are summarized in
Table 2.
The errata described in this document will be addressed
in future revisions of the PIC24FJ256GA110 family
silicon.
Note:
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
Table 2 apply to the current silicon
revision (A6).
Data Sheet clarifications and corrections start on page 12,
following the discussion of silicon issues.
The silicon revision level can be identified using the
current version of MPLAB^® IDE and Microchip’s
programmers, debuggers, and emulation tools, which
are available at the Microchip corporate web site
(www.microchip.com).
For example, to identify the silicon revision level using
MPLAB IDE in conjunction with MPLAB ICD 2 or
PICkit™ 3:
1. Using the appropriate interface, connect the
device to the MPLAB ICD 2
programmer/debugger or PICkit™ 3.
2. From the main menu in MPLAB IDE, select
Configure>Select Device, and then select the
target part number in the dialog box.
3. Select the MPLAB hardware tool
(Debugger>Select Tool).
4. Perform a “Connect” operation to the device
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
Note:
If you are unable to extract the silicon
revision level, please contact your local
Microchip sales office for assistance.
The DEVREV values for the various
PIC24FJ256GA110 family silicon revisions are
shown in Table 1.
TABLE 1: SILICON DEVREV VALUES
Part Number
Device
ID⁽¹⁾
Revision ID for
Silicon Revision⁽²⁾
A3 A5 A6
Part Number
Device
ID⁽¹⁾
Revision ID for
Silicon Revision⁽²⁾
A3 A5 A6
PIC24FJ256GA110 101Eh
PIC24FJ128GA108 100Ah
PIC24FJ192GA110 1016h
PIC24FJ64GA108
1002h
PIC24FJ128GA110
PIC24FJ64GA110
100Eh
1006h
01h
03h
04h
PIC24FJ256GA106
PIC24FJ192GA106
1018h
1010h
01h 03h 04h
PIC24FJ256GA108 101Ah
PIC24FJ128GA106 1008h
PIC24FJ192GA108 1012h
PIC24FJ64GA106
1000h
Note 1: The Device IDs (DEVID and DEVREV) are located at the last two implemented addresses of configuration
memory space. They are shown in hexadecimal in the format “DEVID DEVREV”.
2: Refer to the “PIC24FJXXXGA0XX Flash Programming Specification” (DS39768) for detailed information
on Device and Revision IDs for your specific device.
 2008-2013 Microchip Technology Inc.
DS80368N-page 1