DSPIC30F2012-30I Datasheet, PDF (156/210 Pages) Microchip Technology – High-Performance, 16-bit Digital Signal Controllers

dsPIC30F2011/2012/3012/3013
TABLE 20-9: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
VOL
Output Low Voltage⁽²⁾
DO10
I/O ports
—
— 0.6
V IOL = 8.5 mA, VDD = 5V
—
— 0.15 V IOL = 2.0 mA, VDD = 3V
DO16
OSC2/CLKO
—
— 0.6
V IOL = 1.6 mA, VDD = 5V
(RC or EC Osc mode)
VOH
Output High Voltage⁽²⁾
—
— 0.72 V IOL = 2.0 mA, VDD = 3V
DO20
I/O ports
VDD – 0.7 — —
V IOH = -3.0 mA, VDD = 5V
VDD – 0.2 — —
V IOH = -2.0 mA, VDD = 3V
DO26
OSC2/CLKO
VDD – 0.7 — —
V IOH = -1.3 mA, VDD = 5V
(RC or EC Osc mode)
VDD – 0.1 — —
V IOH = -2.0 mA, VDD = 3V
Capacitive Loading Specs
on Output Pins⁽²⁾
DO50 COSC2 OSC2/SOSC2 pin
—
— 15 pF In XTL, XT, HS and LP modes
when external clock is used to
drive OSC1.
DO56 CIO
DO58 CB
All I/O pins and OSC2
SCL, SDA
—
— 50 pF RC or EC Osc mode
—
— 400 pF In I²C mode
Note 1: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: These parameters are characterized but not tested in manufacturing.
DS70139G-page 156
© 2010 Microchip Technology Inc.