MLX81100_14 Datasheet, PDF (15/19 Pages) Melexis Microelectronic Systems – DC-Motor Controller

MLX81100
DC-Motor Controller
5. Mechanical Specification
5.1 QFN 6x6 40 sawn
A A1 A3 d
D D2 E E2 e
L
N ND NE K
min 0.80 0.00
0.18
4.00
4.30
0.45
0.20
nom 0.85 0.02 0.20 0.25 6.00 4.40 6.00 4.40 0.50 0.50 40 10 10 -
max 0.90 0.05
0.30
4.50
4.50
0.55
-
1. Dimensions and tolerances conform to ASME Y14.5M-1994
2. All dimensions are in Millimeters. All angels are in degrees
3. N is the total number of terminals
∆4. Dimension b applies to metallic terminal and is measured between 0.15 and 0.30mm from terminal tip. If the terminal has the
optional radius on the other end of the terminal, the dimension b should not be measured in that radius area
∆5. ND and NE refer to the number of terminals on each D and E side respectively
Depopulation is possible in a symmetrical fashion
Exposed pad need best
possible contact to ground for
exlectrical and thermal reasons
MLX81100 – Product Abstract
Page 15 of 19
June 2012
Rev 021