MLX92211 Datasheet, PDF (11/13 Pages) Melexis Microelectronic Systems – 3-Wire Hall Effect Latch

MLX92211-AxA
3-Wire Hall Effect Latch
12 Packages
12.1 SE Package (TSOT-23)
Package Outline Drawing & Hall Plate Position
2.75 BSC
1.60 BSC
see note 2
1.00 MAX
0.88
+0.02
- 0.03
SEATING PLANE
0.075
+0.025
- 0.050
TOP VIEW
0.50 BSC
SIDE VIEW
12° REF.
TYP.
0.10 R.
MIN.
4°^+/-4
B’
0.10 R.
MIN.
SEATING PLANE
B
0.40^+/-0.10
see note 5
0.575 REF.
END VIEW
WITH PLATING
BASE METAL
~
0.35
+0.05
- 0.10
0.30
0.45
SECTION B-B’
see note 6
1.45
Hall plate location
Notes:
1. All dimensions are in millimeters
2. Outermost plastic extreme width does not include mold flash or
protrusions. Mold flash and protrusions shall not exceed
0.15mm per side.
3. Outermost plastic extreme length does not include mold flash
or protrusions. Mold flash and protrusions shall not exceed
0.25mm per side.
4. The lead width dimension does not include dambar protrusion.
Allowable dambar protrusion shall be 0.07mm total in excess
of the lead width dimension at maximum material condition.
5. Dimension is the length of terminal for soldering to a substrate.
6. Dimension on SECTION B-B’ applies to the flat section of the
lead between 0.08mm and 0.15mm from the lead tip.
7. Formed lead shall be planar with respect to one another with
0.076mm at seating plane.
Marking:
Top side :11YY (11: Part Number 92211; YY: Year (last 2 digits))
Bottom side: XXXX (XXXX: Lot Number (last 4 digits)
0.275 TYP
Notes:
1. All dimensions are in millimeters
TOP VIEW
Package line
END VIEW
Pin №
1
2
3
Name
VDD
OUT
GND
Type
Supply
Output
Ground
Function
Supply Voltage pin
Open Drain output pin
Ground pin
390109221101
Rev. 007
Page 11 of 13
www.melexis.com
Datasheet
Jan/15