MDT10F73 Datasheet, PDF (9/23 Pages) Micon Design Technology Corporation – 8-bit micro-controller

(22) CCP1CTL: R17
MDT10F73
Bit Symbol
Function
3~0 CCP1M3 0 0 0 0: CCP1 off
~
0 1 0 0: Capture1 mode, every falling edge
CCP1M0
0 1 0 1: Capture1 mode, every rising edge
0 1 1 0: Capture1 mode, every 4^th rising edge
0 1 1 1: Capture1 mode, every 16^th rising edge
1 0 0 0: Compare1 mode, set output on match
1 0 0 1: Compare1 mode, clear output on match
1 0 1 0: Compare1 mode, generate software interrupt on match
1 0 1 1: Compare1 mode, trigger special event
1 1 x x: PWM1 mode
5~4 PWM1LSB These bits are the two LSBs of the PWM1 duty cycle
7~6
--
Unimplemented
(23) RCSC: R18
Bit Symbol
0
RX9DF 9^th bit of received data
Function
1
OERF 0: No overrun error
1: Overrun error
2
FERF 0: No framing error
1: Framing error
3
--
Unimplemented
4
CRENF 0: Disable continuous receive
1: Enable continuous receive
5
SRENF 0: Disable single receive
1: Enable single receive
6 RX9ENF 0: Select 8-bit reception
1: Select 9-bit reception
7
SPENF 0: Serial port disable
1: Serial port enable
(24) TXREG: R19
USART transmit register
P. 9
2011/05 Ver. 1.0