MDT10F73 Datasheet, PDF (10/23 Pages) Micon Design Technology Corporation – 8-bit micro-controller

(25) RCREG: R1A
USART receive register
(26) CCP2L: R1B
Capture/Compare/PWM LSB
MDT10F73
(27) CCP2H: R1C
Capture/Compare/PWM MSB
(28) CCP2CTL: R1D
Bit Symbol
Function
3~0 CCP2M3 0 0 0 0: CCP2 off
~
0 1 0 0: Capture2 mode, every falling edge
CCP2M0
0 1 0 1: Capture2 mode, every rising edge
0 1 1 0: Capture2 mode, every 4^th rising edge
0 1 1 1: Capture2 mode, every 16^th rising edge
1 0 0 0: Compare2 mode, set output on match
1 0 0 1: Compare2 mode, clear output on match
1 0 1 0: Compare2 mode, generate software interrupt on match
1 0 1 1: Compare2 mode, trigger special event
1 1 x x: PWM2 mode
5~4 PWM2LSB These bits are the two LSBs of the PWM2 duty cycle
7~6
--
Unimplemented
(29) ADRES: R1E
A/D result register high byte. The ADRES register is not a writable register.
(30) ADS0 ( A/D Status Register ): R1F
Bit Symbol
Function
0
ADRUN 0: A/D converter module is shut off and consumes no operating current
1: A/D converter module is operating
1
--
Unimplemented
2 GO/DONEB 0: A/D conversion not in progress
1: A/D conversion in progress
5~3 CHS2~0 000: AIC0 001: AIC1 010: AIC2 011: AIC3 100: AIC4
7~6 ASCS1-0 00: fosc/2 01: fosc/8 10: fosc/32 11: f RC (*Note)
P. 10
2011/05 Ver. 1.0