MDT10F73 Datasheet, PDF (5/23 Pages) Micon Design Technology Corporation – 8-bit micro-controller

(9) PCHLAT: R0A
MDT10F73
(10) INTS (Interrupt Status Register): R0B
Bit Symbol
Function
0
RBIF PORT B change interrupt flag, Set when PB <7:4> inputs change
1
INTF Set when INT interrupt occurs
2
TIF Set when TMR0 overflows
3
RBIE 0: Disable PB change interrupt
1: Enable PB change interrupt
4
INTS 0: Disable INT interrupt
1: Enable INT interrupt
5
TIS 0: Disable TMR0 interrupt
1: Enable TMR0 interrupt
6
PEIE 0: Disable all peripheral interrupt
1: Enable all peripheral interrupt
7
GIS 0: Disable global interrupt
1: Enable global interrupt
(11) PIFB1 (Peripheral Interrupt Flag Bit): R0C
Bit Symbol
Function
0 TMR1IF TMR1 interrupt flag
0: TMR1 did not overflow
1: TMR1 overflowed
1 TMR2IF TMR2 interrupt flag
0: No TMR2 to T2PER match occurred
1: TMR2 to T2PER match occurred
2
CCP1IF CCP1 interrupt flag
0: No TMR1 capture/compare occurred
1: A TMR1 capture/compare occurred
3
SCMIF SCM interrupt flag
0: Waiting SCM transmit/receive
1: The SCM transmission/reception is complete
P. 5
2011/05 Ver. 1.0