MDT10F73 Datasheet, PDF (6/23 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10F73
Bit Symbol
Function
4
TXIF USART transmit interrupt flag
0: The USART transmit buffer is full
1: The USART transmit buffer is empty
5
RCIF UASRT receive interrupt flag
0: The USART receive buffer is empty
1: The USART receive buffer is full
6
ADIF A/D interrupt flag
0: A/D conversion is not complete
1: A/D conversion completed
7
--
Unimplemented
(12) PIFB2 (Peripheral Interrupt Flag Bit): R0D
Bit Symbol
Function
CCP2 interrupt flag
0
CCP2IF 0: No TMR1 capture/compare occurred
1: A TMR1 capture/compare occurred
1~3
--
Unimplemented
EEIF : EEPROM Write Operation Interrupt Flag Bit.
4
EEIF ^{0 = The EEPROM write operation is not completed or has not been start}
1 = The EEPROM write operation completed (must be cleared in software)
5~7
--
Unimplemented
(13) TMR1L: R0E
The LSB of the 16-bit TMR1
(14) TMR1H: R0F
The MSB of the 16-bit TMR1
(15) T1STA: R10
Bit Symbol
Function
0 TMR1ON 0: Stop TMR1
1: Enable TMR1
1 TMR1CLK 0: Internal clock (Fosc/4)
1: External clock from pin PC0
P. 6
2011/05 Ver. 1.0