MAX16068 Datasheet, PDF (8/40 Pages) Maxim Integrated Products – 6-Channel, Flash-Configurable System Manager with Nonvolatile Fault Registers

6-Channel, Flash-Configurable System Manager
with Nonvolatile Fault Registers
Pin Configuration
TOP VIEW
21 20 19 18 17 16 15
MON3 22
MON4 23
MON5 24
MON6 25
RESET 26
GPIO1 27
+
GPIO2 28
MAX16068
EP*
14 N.C.
13 N.C.
12 TMS
11 TCK
10 TDI
9 TDO
8 SDA
1 234567
THIN QFN
(5mm x 5mm)
*CONNECT EXPOSED PAD TO GND.
PIN
1–4, 27, 28
5, 19
6
7
8
9
10
11
12
13, 14
15
NAME
GPIO3–
GPIO6,
GPIO1,
GPIO2
GND
A0
SCL
SDA
TDO
TDI
TCK
TMS
N.C.
EN
FUNCTION
Pin Description
General-Purpose Inputs/Outputs. Each GPIO_ can be configured to act as an input, a push-pull
output, an open-drain output, or a special function.
Ground. Connect all GNDs together.
Four-State SMBus Address. Address is sampled upon POR.
SMBus Serial-Clock Input
SMBus Serial-Data Open-Drain Input/Output
JTAG Test Data Output
JTAG Test Data Input
JTAG Test Clock
JTAG Test Mode Select
No Connection. Not internally connected.
Analog Enable Input. All outputs deassert when VEN is below the enable threshold.
8   _______________________________________________________________________________________