English
Language : 

DG411F Datasheet, PDF (5/16 Pages) Maxim Integrated Products – Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches
Quad, Rail-to-Rail, Fault-Protected,
SPST Analog Switches
ELECTRICAL CHARACTERISTICS—Single +12V Supply (continued)
(V+ = +12V, V- = 0, VIH = +2.4V, VIL = +0.8V, GND = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.) (Notes 2, 3)
PARAMETER
SYMBOL
CONDITIONS
TA
MIN TYP MAX UNITS
COM_ Leakage Current
(Note 5)
+25°C
-1
ICOM_
Supplies off, VNO_, VNC_ = ±40V E
-10
+1
µA
+10
+Fault Output Turn-Off Delay
VNO_, VNC_ = +36V, RL = 1kΩ
E
20
ns
+Fault Recovery Time
VNO_, VNC_ = +36V, RL = 1kΩ
E
1
µs
SWITCH DYNAMICS
Turn-On Time
tON
VNO_ or VNC_ = +10V, RL = 300Ω, +25°C
CL = 35pF, Figure 2
E
120 250
ns
315
Turn-Off Time
tOFF
VNO_ or VNC_ = +10V, RL = 300Ω, +25°C
CL = 35pF, Figure 2
E
70
125
ns
140
Break-Before-Make Time Delay
(DG413F Only) (Note 6)
tBBM
VNO_ or VNC_ = +10V, RL = 100Ω, +25°C
CL = 10pF, Figure 3
E
2
1
50
ns
Charge Injection
Q
VGEN = 0, RGEN = 0, CL = 1nF,
Figure 4
+25°C
5
pC
LOGIC INPUT
Input Logic High
Input Logic Low
Input Leakage Current
(Note 5)
VIH
VIL
IIN
VIN_ = 0 or V+
E
2.4
E
E
-1
V
0.8
V
+1
µA
POWER SUPPLY
Power-Supply Range
V+ Supply Current
V+
E
+9
+36
V
+25°C
All VIN_ = +5V, VCOM_ = +6V
E
I+
+25°C
All VIN_ = 0 or V+, VCOM_ = +6V E
180 350
450
µA
85
150
250
Note 2: The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.
Note 3: Electrical specifications at -40°C are not production tested and guaranteed by design.
Note 4: ∆RON = ∆RON(MAX) - ∆RON(MIN).
Note 5: Leakage parameters are 100% tested at maximum rated temperature and with dual supplies and guaranteed by design at +25°C.
Note 6: Guaranteed by design.
Note 7: Off-Isolation = 20 log10 [VCOM/(VNC or VNO)], VCOM = output, VNC or VNO = input to off switch.
Note 8: Between any two switches.
_______________________________________________________________________________________ 5