DG411F Datasheet, PDF (2/16 Pages) Maxim Integrated Products – Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

Quad, Rail-to-Rail, Fault-Protected,
SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
(Voltages Referenced to GND)
V+ ...........................................................................-0.3V to +44V
V- ............................................................................-44V to +0.3V
V+ to V-...................................................................-0.3V to +44V
IN_ ......................................................... (V- - 0.3V) to (V- + 40V)
NO_, NC_ to COM_ (Note1) ................................... -40V to +40V
COM_, NO_, NC_ Voltage with
Power On (Note 1).............................................. -36V to +36V
COM_, NO_, NC_ Voltage with
Power Off (Note 1).............................................. -40V to +40V
Continuous Current (any terminal) .................................. ±30mA
Peak Current COM_, NO_, NC_
(pulsed at 1ms, 10% duty cycle) ...............................±100mA
Continuous Power Dissipation (T_A = +70°C)
16-Pin TSSOP (derate 9.4mW/°C above +70°C) ....... 755mW
16-Pin SO (derate 8.7mW/°C above +70°C)................696mW
16-Pin Plastic DIP (derate 10.53mW/°C
above +70°C) ........................................................ 842mW
Operating Temperature Range .......................... -40°C to +85°C
Junction Temperature .................................................... +150°C
Storage Temperature Range ........................... -65°C to +160°C
Lead Temperature (soldering, 10s) ............................... +300°C
Note 1: COM_, NO_, and NC_ pins are fault protected. Signals on COM_, NO_, and NC_ exceeding -36V to +36V may damage the
device during power-on conditions. When the power is off, the maximum range is -40V to +40V.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—±15V Dual Supplies
(V+ = +15V, V- = -15V, V_IH = +2.4V, V_IL = +0.8V, GND = 0, T_A = T_MIN to T_MAX, unless otherwise noted. Typical values are at
T_A = +25°C.) (Notes 2, 3)
PARAMETER
SYMBOL
CONDITIONS
T_A
MIN TYP MAX UNITS
ANALOG SWITCH
Fault-Free Analog Signal Range
On-Resistance
On-Resistance Match Between
Channels (Note 4)
On-Resistance Flatness
NO_, NC_ Off-Leakage Current
(Note 5)
COM_ Off-Leakage Current
(Note 5)
COM_ On-Leakage Current
(Note 5)
FAULT
Fault-Protected Analog Signal
Range
NO_ or NC_ Off-Leakage
Current
V_{COM_},
V_{NO_}, V_{NC_}
R_ON
I_{COM_} = 10mA,
V_{NO_}, V_{NC_} = ±10V
∆R_ON
I_{COM_} = 10mA,
V_{NO_}, V_{NC_} = ±10V
R_FLAT(ON)
I_{COM_} = 10mA,
V_{NO_}, V_{NC_} = ±5V, 0
I_{NO_(OFF)}, V_{COM_} = ±10V,
I_{NC_(OFF)} V_{NO_}, V_{NC_} = › 10V
I_{COM_(OFF)}
V_{COM_} = ±10V,
V_{NO_}, V_{NC_} = › 10V
I_{COM_(ON)}
V_{COM_} = ±10V,
V_{NO_}, V_{NC_} = ±10V or floating
V_{COM_},
V_{NO_,} V_{NC_}
V+ = +15V, V- = -15V
V+ = 0, V- = -15V
V+ = V- = 0
I_{NO_}, I_{NC_} V_{NO_}, V_{NC_} = ±36V
COM_ Off-Leakage Current
I_{COM_} V_{COM_} = ±36V
E
V-
V+
V
+25°C
E
25
35
Ω
45
+25°C
E
0.2
1.5
Ω
2.0
+25°C
E
1.0
3
Ω
4
+25°C -0.25 +0.025 +0.25
nA
E
-20
+20
+25°C -0.25 +0.025 +0.25
nA
E
-20
+20
+25°C -0.5 +0.025 +0.5
nA
E
-40
+40
E
-36
E
-36
E
-40
+25°C
-1
E
-10
+25°C
-1
E
-10
+36
+36
V
+40
+1
µA
+10
+1
µA
+10
2 _______________________________________________________________________________________