DG411F Datasheet, PDF (13/16 Pages) Maxim Integrated Products – Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

Quad, Rail-to-Rail, Fault-Protected,
SPST Analog Switches
Test Circuits/Timing Diagrams (continued)
V+
10nF
V+
3.0V
COM_
DG411F
IN_ ^DG412F
DG413F
NO_, NC_
GND V-
10nF
V-
50Ω RESISTOR
ONLY NEEDED
FOR CROSSTALK
AND ISOLATION
V_IN
NETWORK
ANALYZER
50Ω
50Ω
50Ω
V_OUT
MEAS
50Ω
REF
50Ω
MEASUREMENTS ARE STANDARDIZED AGAINST SHORT AND OPEN AT SOCKET TERMINALS.
OFF-ISOLATION IS MEASURED BETWEEN COM_ AND "OFF" NO_ OR NC_ TERMINALS.
ON-RESPONSE IS MEASURED BETWEEN COM_ AND "ON" NO_ OR NC_ TERMINALS.
CROSSTALK IS MEASURED BETWEEN COM_ TERMINALS WITH ALL SWITCHES ON.
V- IS CONNECTED TO GND (0V) FOR SINGLE-SUPPLY OPERATION.
Figure 6. Frequency Response, Off-Isolation, and Crosstalk
TOP VIEW
IN1 1
COM1 2
NO1 3
V- 4
GND 5
NO4 6
COM4 7
IN4 8
DG412F
16 IN2
15 COM2
14 NO2
13 V+
12 N.C.
11 NO3
10 COM3
9 IN3
DIP/TSSOP/SO
DG412F
LOGIC SWITCH
0
OFF
1
ON
N.C. = NOT CONNECTED. SWITCHES SHOWN FOR LOGIC “0” INPUT.
ALL SWITCHES ARE OFF WITH POWER REMOVED
Pin Configurations (continued)
IN1 1
COM1 2
NO1 3
V- 4
GND 5
NO4 6
COM4 7
IN4 8
DG413F
16 IN2
15 COM2
14 NC2
13 V+
12 N.C.
11 NC3
10 COM3
9 IN3
DIP/TSSOP/SO
LOGIC
0
1
DG413F
SWITCHES SWITCHES
1, 4
2, 3
OFF
ON
ON
OFF
______________________________________________________________________________________ 13