|
Z86L81 Datasheet, PDF (34/88 Pages) Maxim Integrated Products – 28-Pin Low-Voltage Infrared Microcontrollers | |||
|
◁ |
Z86L81/86/98
28-Pin Low-Voltage Infrared Microcontrollers
28
Register Description
LVD (D) 0Ch. Low-Voltage Detection Register
Bit 0 enables/disables the Low-Voltage Detection Circuit. Bit 1 flags if low voltage
is detected. Interrupt 5 is triggered when the flag bit is set, given that IRQ5 is not
masked.
Note: The LVD flag will be valid after enabling the detection for 20 ïS (design
estimation, not tested in production). LVD does not work at STOP mode. It
must be disabled during STOP mode in order to reduce current.
Field
LVD
Bit Position
765432--
------1-
-------0
Note:
*Default after POR
R1
0*
R/W 1
0*
Description
Reserved
No Effect
LV flag set
LV flag reset
Enable LVD
Disable LVD
HI8(D)0Bh
This register holds the captured data from the output of the 8-bit Counter/Timer0.
Typically, this register is used to hold the number of counts when the input signal
is 1.
Field
Bit Position
T8_Capture_HI 76543210
Description
R Captured Data
W No Effect
L08(D)0Ah
This register holds the captured data from the output of the 8-bit Counter/Timer0.
Typically, this register is used to hold the number of counts when the input signal
is 0.
Field
Bit Position
T8_Capture_L0 76543210
Description
R Captured Data
W No Effect
19-4615; Rev 0; 4/09
|
▷ |