 English |
|
|
|
|
|
|
|
| MAX13202E Datasheet, PDF (2/9 Pages) Maxim Integrated Products – 2-/4-/6-/8-Channel, ±30kV ESD Protectors in μDFN | |||
| |||
| ◁ |
2-/4-/6-/8-Channel, ±30kV ESD Protectors in µDFN
ABSOLUTE MAXIMUM RATINGS
VCC to GND ............................................................-0.3V to +18V
I/O_ to GND ................................................-0.3V to (VCC + 0.3V)
Continuous Power Dissipation (TA = +70°C)
6-Pin, 1mm x 1.5mm µDFN (derate 2.1mW/°C
above +70°C)................................................................168mW
6-Pin, 2mm x 2mm µDFN (derate 4.5mW/°C
above +70°C)................................................................358mW
8-Pin, 2mm x 2mm µDFN (derate 4.8mW/°C
above +70°C)................................................................381mW
10-Pin, 2mm x 2mm µDFN (derate 5.0mW/°C
above +70°C)................................................................403mW
Operating Temperature Range .........................-40°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature .....................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +5V ±5%, TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = +5V and TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Supply Voltage
VCC
0.9
16.0
V
Supply Current
Diode Forward Voltage
ICC
VF
IF = 10mA
1
100
nA
0.65
0.95
V
TA = +25°C, ±15kV,
Human Body Model,
IF = 10A
Positive transients
Negative transients
VCC + 25
-25
Channel Clamp Voltage
(Note 2)
TA = +25°C, ±14kV,
Positive transients
VC
Contact Discharge
(IEC 61000-4-2), IF = 42A Negative transients
VCC + 80
V
-80
TA = +25°C, ±30kV,
Air-Gap Discharge
(IEC 61000-4-2), IF = 90A
Positive transients
Negative transients
VCC + 120
-120
Channel Leakage Current
(Note 3)
Channel Input Capacitance
ESD PROTECTION
TA = -40°C to +50°C
TA = -40°C to +125°C
VCC = 5V, bias of VCC/2, f = 1MHz (Note 3)
-1
+1
nA
-1
+1
µA
6
7
pF
Human Body Model
±15
kV
IEC 61000-4-2
Contact Discharge
MAX13204E/MAX13206E/MAX13208E
MAX13202E
±14
kV
±12
IEC 61000-4-2
Air-Gap Discharge
±30
kV
Note 1: Limits over temperature are guaranteed by design, not production tested.
Note 2: Idealized clamp voltages (L1 = L2 = L3 = 0) (Figure 1); see the Applications Information section for more information.
Note 3: Guaranteed by design. Not production tested.
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese