 English |
|
|
|
|
|
|
|
| MAX1224_09 Datasheet, PDF (2/18 Pages) Maxim Integrated Products – 1.5Msps, Single-Supply, Low-Power, True-Differential, 12-Bit ADCs | |||
| |||
| ◁ |
1.5Msps, Single-Supply, Low-Power,
True-Differential, 12-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
VL to GND ................-0.3V to the lower of (VDD + 0.3V) and +6V
Digital Inputs
to GND .................-0.3V to the lower of (VDD + 0.3V) and +6V
Digital Output
to GND ....................-0.3V to the lower of (VL + 0.3V) and +6V
Analog Inputs and
REF to GND..........-0.3V to the lower of (VDD + 0.3V) and +6V
RGND to GND .......................................................-0.3V to +0.3V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
12-Pin TQFN (derate 16.9mW/°C above +70°C) ......1349mW
Operating Temperature Range
MAX127_ ETC.................................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +2.7V to +3.6V, VL = VDD, VREF = 2.048V, fSCLK = 24.0MHz, 50% duty cycle, TA = -40°C to +85°C, unless otherwise noted.
Typical values are at VDD = 3V and TA = +25°C.)
PARAMETER
DC ACCURACY
Resolution
Relative Accuracy
Differential Nonlinearity
Offset Error
SYMBOL
CONDITIONS
INL
DNL
(Note 1)
Guaranteed no missing codes (Note 2)
MIN TYP MAX UNITS
12
Bits
-1.5
+1.5 LSB
-1.0
+1.5 LSB
±8.0 LSB
Offset-Error Temperature
Coefficient
±1
ppm/°C
Gain Error
Offset nulled
Gain Temperature Coefficient
DYNAMIC SPECIFICATIONS (fIN = 525kHz sine wave, VIN = VREF, unless otherwise noted.)
Signal-to-Noise Plus Distortion
SINAD
66
Total Harmonic Distortion
THD Up to the 5th harmonic
Spurious-Free Dynamic Range
SFDR
Intermodulation Distortion
IMD fIN1 = 250kHz, fIN2 = 300kHz
Full-Power Bandwidth
-3dB point
Full-Linear Bandwidth
S/(N + D) > 68dB, single ended
CONVERSION RATE
Minimum Conversion Time
tCONV (Note 3)
Maximum Throughput Rate
1.5
Minimum Throughput Rate
(Note 4)
10
Track-and-Hold Acquisition Time
Aperture Delay
tACQ (Note 5)
Aperture Jitter
(Note 6)
External Clock Frequency
fSCLK (Note 7)
±6.0 LSB
±2
ppm/°C
69
dB
-80
-76
dB
-83
-76
dB
-78
dB
15
MHz
1.2
MHz
0.667
µs
Msps
ksps
125
ns
5
ns
30
ps
24.0 MHz
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese