English
Language : 

MAX1169N Datasheet, PDF (2/20 Pages) Maxim Integrated Products – 58.6ksps, 16-Bit, 2-Wire Serial ADC in a 14-Pin TSSOP
58.6ksps, 16-Bit, 2-Wire Serial ADC
in a 14-Pin TSSOP
ABSOLUTE MAXIMUM RATINGS
AVDD to AGND .........................................................-0.3V to +6V
DVDD to DGND .........................................................-0.3V to +6V
AGND to DGND.....................................................-0.3V to +0.3V
AGNDS to AGND...................................................-0.3V to +0.3V
AIN, REF, REFADJ to AGND....................-0.3V to (AVDD + 0.3V)
SCL, SDA, ADD_ to DGND.......................................-0.3V to +6V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
14-Pin TSSOP (derate 9.1mW/°C above +70°C) .........727mW
Operating Temperature Ranges
MAX1169_CUD ..................................................0°C to +70°C
MAX1169_EUD ................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(AVDD = +4.75V to +5.25V, DVDD = +2.7V to +5.5V, fSCL = 1.7MHz (33% duty cycle), fSAMPLE = 58.6ksps, VREF = +4.096V, external ref-
erence applied to REF, REFADJ = AVDD, CREF = 10µF, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
DC ACCURACY (Note 1)
Resolution
Relative Accuracy
(Note 2)
Differential Nonlinearity
Offset Error
SYMBOL
CONDITIONS
INL
DNL
MAX1169A
MAX1169B
MAX1169C
MAX1169A, no missing codes
MAX1169B, no missing codes
MAX1169C
MIN TYP MAX UNITS
16
Bits
±2
±2
LSB
±4
±1
-1.0
±1.5 LSB
±2
2
5
mV
Offset-Error Temperature
Coefficient
1.0
ppm/°C
Gain Error
(Note 3)
Gain Temperature Coefficient
DYNAMIC PERFORMANCE (fIN(sine wave) = 1kHz, VIN = VREF(P-P), fSAMPLE = 58.6ksps)
Signal-to-Noise Plus Distortion
SINAD
Total Harmonic Distortion
THD Up to the 5th harmonic
Spurious-Free Dynamic Range
SFDR
Signal-to-Noise Ratio
SNR
Full-Power Bandwidth
FPBW -3dB point
Full-Linear Bandwidth
SINAD > 81dB
CONVERSION RATE (Figure 11)
Conversion Time
(SCL Stretched Low)
tCONV
Fast mode
High-speed mode
Throughput Rate (Note 4)
Fast mode
fSAMPLE High-speed mode
Internal Clock Frequency
fCLK
Track/Hold Acquisition Time
tACQ (Note 5)
Aperture Delay, Figure 11c
(Note 6)
Fast mode
tAD
High-speed mode
±0.25
0.1
±0.5 %FSR
ppm/°C
86
90
dB
-102 -90
dB
92
105
dB
87
90
dB
4
MHz
33
kHz
7.1
7.5
µs
5.8
6
19
ksps
58.6
4
MHz
1100
ns
50
ns
30
2 _______________________________________________________________________________________