DS1124_09 Datasheet, PDF (2/10 Pages) Maxim Integrated Products – 5.0V 8-Bit Programmable Timing Element

5.0V 8-Bit Programmable
Timing Element
ABSOLUTE MAXIMUM RATINGS
Voltage Range on V_CC Pin Relative to Ground .....-0.5V to +6.0V
Voltage Range on IN, E, D, and CLK
Relative to Ground* ................................-0.5V to (V_CC + 0.5V)
Operating Temperature Range ...........................-40°C to +85°C
*Not to exceed +6.0V.
Storage Temperature Range .............................-55°C to +125°C
Short-Circuit Output Current ..........................50mA for 1 second
Soldering Temperature...................See J-STD-020 Specification
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
(TA = -40°C to +85°C)
PARAMETER
SYMBOL
CONDITIONS
Supply Voltage
V_CC (Note 1)
Input Logic 1
V_IH
Input Logic 0
V_IL
MIN TYP MAX UNITS
4.75
5.25
V
2.2
V_CC +
0.3
V
-0.3
+0.8
V
DC ELECTRICAL CHARACTERISTICS
(V_CC = +4.75V to +5.25V, T_A = -40°C to +85°C, unless otherwise noted.)
PARAMETER
Active Current
High-Level Output Current
Low-Level Output Current
Input Leakage
SYMBOL
CONDITIONS
I_CCA
I_OH
V_CC = min, V_OH = 2.3V
I_OL
Q pin, V_CC = min, V_OL = 0.5V
OUT pin, V_CC = min, V_OL = 0.5V
I_L
MIN TYP MAX UNITS
15
30
mA
-1.0
mA
4.0
mA
8.0
-1.0
+1.0
μA
AC ELECTRICAL CHARACTERISTICS
(V_CC = +4.75V to +5.25V, T_A = -40°C to +85°C, unless otherwise noted.)
PARAMETER
Serial Clock Frequency
Input Pulse Width (E, CLK)
Data Setup to Clock
Data Hold from Clock
Data Setup to Enable
Data Hold to Enable
Enable Setup to Clock
Enable Hold from Clock
E to Q Valid
E to Q High Impedance
CLK to Q Valid
CLK to Q Invalid
SYMBOL
f_CLK
t_EW, t_CW
t_DSC
t_DHC
t_DSE
t_DHE
t_ES
t_EH
t_EQV
t_EQZ
t_CQV
t_CQX
CONDITIONS
MIN TYP MAX UNITS
10
MHz
50
ns
30
ns
0
ns
30
ns
0
ns
0
ns
30
ns
50
ns
0
50
ns
50
ns
0
ns
2 _______________________________________________________________________________________