MAX11612_11 Datasheet, PDF (1/22 Pages) Maxim Integrated Products – Low-Power, 4-/8-/12-Channel, I2C, 12-Bit ADCs in Ultra-Small Packages

19-4561; Rev 3; 2/11
EVAALVUAAILTAIOBNLEKIT
Low-Power, 4-/8-/12-Channel, I²C,
12-Bit ADCs in Ultra-Small Packages
General Description
The MAX11612–MAX11617 low-power, 12-bit, multi-
channel analog-to-digital converters (ADCs) feature
internal track/hold (T/H), voltage reference, clock, and an
I²C-compatible 2-wire serial interface. These devices
operate from a single supply of 2.7V to 3.6V
(MAX11613/MAX11615/MAX11617) or 4.5V to 5.5V
(MAX11612/MAX11614/MAX11616) and require only
670µA at the maximum sampling rate of 94.4ksps.
Supply current falls below 230µA for sampling rates
under 46ksps. AutoShutdown™ powers down the
devices between conversions, reducing supply current
to less than 1µA at low throughput rates. The
MAX11612/MAX11613 have 4 analog input channels
each, the MAX11614/MAX11615 have 8 analog input
channels each, while the MAX11616/MAX11617 have
12 analog input channels each. The fully differential
analog inputs are software configurable for unipolar or
bipolar, and single-ended or differential operation.
The full-scale analog input range is determined by the
internal reference or by an externally applied reference
voltage ranging from 1V to V_DD. The MAX11613/
MAX11615/MAX11617 feature a 2.048V internal refer-
ence and the MAX11612/MAX11614/MAX11616 feature
a 4.096V internal reference.
The MAX11612/MAX11613 are available in an 8-pin
µMAX^® package and the MAX11613 is available in an
ultra-small, 1.9mm x 2.2mm, 12-bump wafer-level pack-
age (WLP). The MAX11614–MAX11617 are available in a
16-pin QSOP package. The MAX11612–MAX11617 are
guaranteed over the extended temperature range (-40°C
to +85°C). For pin-compatible 10-bit parts, refer to the
MAX11606–MAX11611 data sheet. For pin-compatible 8-
bit parts, refer to the MAX11600–MAX11605 data sheet.
Handheld Portable
Applications
Medical Instruments
Battery-Powered Test
Equipment
Applications
Solar-Powered Remote
Systems
Received-Signal-Strength
Indicators
System Supervision
Features
o High-Speed I²C-Compatible Serial Interface
400kHz Fast Mode
1.7MHz High-Speed Mode
o Single-Supply
2.7V to 3.6V (MAX11613/MAX11615/MAX11617)
4.5V to 5.5V (MAX11612/MAX11614/MAX11616)
o Ultra-Small Packages
8-Pin µMAX (MAX11612/MAX11613)
1.9mm x 2.2mm, 12-Bump WLP (MAX11613)
16-Pin QSOP (MAX11614–MAX11617)
o Internal Reference
2.048V (MAX11613/MAX11615/MAX11617)
4.096V (MAX11612/MAX11614/MAX11616)
o External Reference: 1V to V_DD
o Internal Clock
o 4-Channel Single-Ended or 2-Channel Fully
Differential (MAX11612/MAX11613)
o 8-Channel Single-Ended or 4-Channel Fully
Differential (MAX11614/MAX11615)
o 12-Channel Single-Ended or 6-Channel Fully
Differential (MAX11616/MAX11617)
o Internal FIFO with Channel-Scan Mode
o Low Power
670µA at 94.4ksps
230µA at 40ksps
60µA at 10ksps
6µA at 1ksps
0.5µA in Power-Down Mode
o Software-Configurable Unipolar/Bipolar
Ordering Information
PART
TEMP RANGE
PIN-
PACKAGE
I²C SLAVE
ADDRESS
MAX11612EUA+ -40°C to +85°C 8 µMAX
0110100
MAX11613EUA+ -40°C to +85°C 8 µMAX
0110100
MAX11613EWC+* -40°C to +85°C 12 WLP
0110100
MAX11614EEE+ -40°C to +85°C 16 QSOP 0110011
MAX11615EEE+ -40°C to +85°C 16 QSOP 0110011
MAX11616EEE+ -40°C to +85°C 16 QSOP 0110101
MAX11617EEE+ -40°C to +85°C 16 QSOP 0110101
+Denotes a lead(Pb)-free/RoHs-compliant package.
*Future product—contact factory for availability.
AutoShutdown is a trademark of Maxim Integrated Products, Inc.
µMAX is a registered trademark of Maxim Integrated Products, Inc.
Pin Configurations, Typical Operating Circuit, and Selector
Guide appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.